Alcatel One Touch Pop D3 Firmware File

This Alcatel One Touch Pop D3 flash file stock rom tutorial is used to solve various problems that occur on Alcatel One Touch Pop D3. As an example if there is bootloop or hang because of the virus, you can try this flashing way to overcome the bootloop and other problems on Alcatel One Touch Pop D3 software. The important thing to remember for this tutorial is to backup data stored in internal memory. This Alcatel One Touch Pop D3 firmware is stock rom official.

Because with this flash will wipe the stored data and replaced with new firmware file. Get Alcatel One Touch Pop D3 firmware on the middle post. Don’t forget to install the Alcatel One Touch Pop D3 driver first before flash.

How To Flash Alcatel One Touch Pop D3 Firmware File via SP Flash Tool

With this Tutorial How To Flash Alcatel One Touch Pop D3 Firmware via SP Flash Tool you can also solve other error problems, such as:

  • Alcatel One Touch Pop D3 Forgot Password
  • Alcatel One Touch Pop D3 Stuck on Logo
  • Alcatel One Touch Pop D3 Forget Pattern
  • Alcatel One Touch Pop D3 Bootloop
  • Alcatel One Touch Pop D3 Soft Brick
  • Alcatel One Touch Pop D3 Touch screen is not sensitive
  • Alcatel One Touch Pop D3 Slow not responsive / Hang
  • Alcatel One Touch Pop D3 Virus malware
  • Alcatel One Touch Pop D3 Unfortunately the app has stopped
  • Alcatel One Touch Pop D3 often restarts itself
  • And other errors

Tools How To Flash Alcatel One Touch Pop D3

  1. Driver MTK Google Drive
  2. Driver USB VCOM Google Drive (install it when flash won’t running)
  3. Driver CDC Installer (Optional, install it when the device can’t detect on PC)
  4. Driver Lenovo (Optional, install it when the device can’t detect on PC)
  5. Flashtool Google Drive (Use Flash Tool V3, if can’t load scatter file. Get SP Flash Tool 3)
  6. USB Cable Data
  7. Get Stock Rom Alcatel One Touch Pop D3 4036E_MT6572_16072014_4.4.2.zip Firmware Flash File via Google Drive – Only for Alcatel One Touch Pop D3
  8. Password ZIP:

Read Also:

How To Flash Alcatel One Touch Pop D3 Firmware File via SP Flash Tool

  1. First of all, get all tools and extract the .zip file.
  2. Extract Alcatel One Touch Pop D3 flash file and you will see “MT6572_Android_scatter.txt“.
  3. Install driver.
  4. Install and open Flash Tool application.
  5. Click on Scatter-loading, then open the folder of flash file Alcatel One Touch Pop D3, then click “MT6572_Android_scatter.txt“.How To Flash Alcatel One Touch Pop D3 Firmware File via SP Flash Tool
  6. Wait until the flash file loaded.
  7. Uncheck on Preloader file when you not sure this rom for Alcatel One Touch Pop D3. This will prevent from hard brick.How To Flash Alcatel One Touch Pop D3 Firmware File via SP Flash Tool
  8. Make sure to select Download Only mode, then click the Download button.How To Flash Alcatel One Touch Pop D3 Firmware via SP Flash Tool
  9. Now Turn off your Alcatel One Touch Pop D3 and remove the battery (for non-removable battery, just need to turn off the device).
  10. Press Volume Up and connect the device to PC (press Volume Down when flash not running, unplug the cable before reconnect and repeat the steps above).
  11. Flash Alcatel One Touch Pop D3 will run automatically.
  12. Wait until flashing finished with green notify.How To Flash Alcatel One Touch Pop D3 Firmware File via SP Flash Tool
  13. Unplug the cable and turn on your device.
  14. First booting process will take 10-15 minutes, so just wait until entering the wizard menu.
  15. Flash Alcatel One Touch Pop D3 Firmware DONE.

NOTE:

  • When device can’t detect on PC, try to reinstall the driver (optional drivers).
  • When flashing won’t running on “Download Only” mode, change with “Firmware Upgrade” mode, disconnect the device before reflashing.

How To Flash Alcatel One Touch Pop D3 Firmware File via SP Flash Tool

DO WITH YOUR OWN RISK