Alcatel OneTouch Pixi 3 5017X Flash File via SP Flash Tool

Categories : Alcatel

Unlock Phone, When device is LOCKED Click Here

This flash file stock rom tutorial is used to solve various problems that occur on Alcatel OneTouch Pixi 3 5017X. As an example if there is bootloop or hang because of the virus, you can try this flashing way to overcome the bootloop and other problems on Alcatel OneTouch Pixi 3 5017X software. The important thing to remember for this tutorial is to backup data stored in internal memory. Because with this flash will wipe the stored data and replaced with new firmware file.

How To Flash Firmware Alcatel OneTouch Pixi 3 5017X

With this Tutorial “Alcatel OneTouch Pixi 3 5017X Flash File via SP Flash Tool” you can also solve other error problems, such as:

  1. Alcatel OneTouch Pixi 3 5017X Forgot Password
  2. Alcatel OneTouch Pixi 3 5017X Forget Pattern
  3. Alcatel OneTouch Pixi 3 5017X Bootloop
  4. Alcatel OneTouch Pixi 3 5017X Soft Brick
  5. Alcatel OneTouch Pixi 3 5017X Touch screen is not sensitive
  6. Alcatel OneTouch Pixi 3 5017X Slow not responsive / Hang
  7. Alcatel OneTouch Pixi 3 5017X Virus malware
  8. Alcatel OneTouch Pixi 3 5017X Unfortunately messages has stopped
  9. Alcatel OneTouch Pixi 3 5017X Unfortunately the app has stopped
  10. Alcatel OneTouch Pixi 3 5017X often restarts itself
  11. And other errors
Tools

Read Also:

Alcatel OneTouch Pixi 3 5017X Flash File via SP Flash Tool
  • Download and extract the .zip file.
  • Extract Alcatel OneTouch Pixi 3 5017X firmware file and you will see “MTxxxx_Android_scatter.txt“.
  • Install driver.
  • Install and open Flash Tool application.
  • Click on “Scatter-loading“, then open the folder of flash file Alcatel OneTouch Pixi 3 5017X, then click “MTxxxx_Android_scatter.txt“.

Alcatel OneTouch Pixi 3 5017X Flash File via SP Flash Tool

  • Wait until the file loaded.
  • Uncheck on “Preloader” file when you not sure this rom for Alcatel OneTouch Pixi 3 5017X. This will prevent from hard brick.

Alcatel OneTouch Pixi 3 5017X Flash File via SP Flash Tool

  • Make sure to select “Download Only” mode, then click “Download” button.

Start Flashing

  • Now Turn off your Alcatel OneTouch Pixi 3 5017X and remove the battery (for non-removable battery, just need to turn off the device).
  • Press “Volume Up” and connect the device to PC (press “Volume Down” when flash not running, unplug the cable before reconnect and repeat the steps above).
  • Flash Alcatel OneTouch Pixi 3 5017X will run automatically.
  • Wait until flashing finished with green notify.

Alcatel OneTouch Pixi 3 5017X Flash File via SP Flash Tool

  • Unplug cable and turn on your device.
  • First booting process will take 10-15 minutes, so just wait until enter the wizard menu.
  • Flash DONE.

NOTE:

  • When device can’t detect on PC, try to reinstall the driver (optional drivers).
  • When flashing won’t running on “Download Only” mode, change with “Firmware Upgrade” mode, disconnect the device before re flash.

Alcatel OneTouch Pixi 3 5017X Flash File via SP Flash Tool

DO WITH YOUR OWN RISK