How To Flash Firmware Samsung Galaxy Note 4 SM-N910R4 via Odin
Unlock First, When flash failed Click Here
There are so many ways to solve the problem on Samsung SM-N910R4, such as bootloop or slow down after installing the application. With this flash file, everything will be solved easily. The most important thing to do is to backup data stored in memory Samsung Galaxy Note 4 SM-N910R4 and replaced with fresh stock ROM firmware Samsung Galaxy Note 4 SM-N910R4. Because this flashing process will wipe all the data stored in it. You need to backup data before flash started.
With this tutorial How To Flash Firmware Samsung Galaxy Note 4 SM-N910R4 via Odin can also solve other error problems, such as:
- Forgot Password
- Forget Pattern
- Samsung Galaxy Note 4 SM-N910R4 Bootloop
- Softbrick
- The touch screen is not sensitive
- low not responsive / Hang
- Virus malware
- Unfortunately, messages has stopped
- Unfortunately, the app has stopped
- Samsung Galaxy Note 4 SM-N910R4 often restarts itself
- And other errors
Tools for Flash Firmware Samsung Galaxy Note 4 SM-N910R4
- Download Firmware File Samsung Galaxy Note 4 SM-N910R4 Stock Rom, Only for Samsung Galaxy Note 4 SM-N910R4
- Odin3 V3.12.5.zip
- Samsung Driver
- USB Cable recommended using original Samsung USB Cable
- PC / Laptop OS Windows recommended Win 7
Read Also: How To Flash Firmware Samsung Galaxy Note 4 SM-N910K via Odin
How To Flash Firmware Samsung Galaxy Note 4 SM-N910R4 via Odin
- Model type is very important, make sure it has chosen correctly before download.
- After all the materials downloaded, move it to one folder.
- Extract the Samsung Galaxy Note 4 SM-N910R4 flash file firmware with .zip and you should see the .md5 file.
- Install the Samsung driver and make sure your device is detected by the computer.
- Open and run Odin.
- Turn off your Samsung Galaxy Note 4 SM-N910R4.
- Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.
- If it is already in download mode, check on Odin application whether it has been detected or not.
- When the device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).
- Then click the “AP” and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than “AP“, please input it according to its original name “BL“, “CP“, “CSC“.
- And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).
- If everything is ready, click on “Start” to start flash Samsung Galaxy Note 4 SM-N910R4.
- A successful flash sign will display the message “PASS!” in the upper left of the Odin application.
- After the message appears, Samsung Galaxy Note 4 SM-N910R4 will reboot the system automatically and wait until entering the wizard menu.
- This boot process will take a little longer than usual, so just wait.
Read Also: How To Flash Firmware Samsung Galaxy S5 Sport SM-G860P via Odin
NOTE:
If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Galaxy Note 4 SM-N910R4, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).
