How To Flash Firmware Samsung Galaxy Alpha SM-G850S via Odin
Unlock First, When flash failed Click Here
The best way to cope with android problems such as bootloop or hang because of the virus. You can try with Samsung SM-G850S flash file. If that happens on your Samsung Galaxy Alpha SM-G850S, you can try this flash. This will wipe all data in internal memory. Because it will replace with fresh firmware Samsung Galaxy Alpha SM-G850S, stock ROM without any problems. So before flashing on this Samsung SM-G850S, backup important data first to the PC or internal memory.
With this tutorial How To Flash Firmware Samsung Galaxy Alpha SM-G850S via Odin can also solve other error problems, such as:
- Forgot Password
- Forget Pattern
- Samsung Galaxy Alpha SM-G850S Bootloop
- Softbrick
- The touch screen is not sensitive
- low not responsive / Hang
- Virus malware
- Unfortunately, messages has stopped
- Unfortunately, the app has stopped
- Samsung Galaxy Alpha SM-G850S often restarts itself
- And other errors
Tools for Flash Firmware Samsung Galaxy Alpha SM-G850S
- Download Firmware File Samsung Galaxy Alpha SM-G850S Stock Rom, Only for Samsung Galaxy Alpha SM-G850S
- Odin3 V3.12.5.zip
- Samsung Driver
- USB Cable recommended using original Samsung USB Cable
- PC / Laptop OS Windows recommended Win 7
Read Also: How To Flash Firmware Samsung Galaxy Note 4 SM-N910R4 via Odin
How To Flash Firmware Samsung Galaxy Alpha SM-G850S via Odin
- Model type is very important, make sure it has chosen correctly before download.
- After all the materials downloaded, move it to one folder.
- Extract the Samsung Galaxy Alpha SM-G850S flash file firmware with .zip and you should see the .md5 file.
- Install the Samsung driver and make sure your device is detected by the computer.
- Open and run Odin.
- Turn off your Samsung Galaxy Alpha SM-G850S.
- Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.
- If it is already in download mode, check on Odin application whether it has been detected or not.
- When the device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).
- Then click the “AP” and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than “AP“, please input it according to its original name “BL“, “CP“, “CSC“.
- And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).
- If everything is ready, click on “Start” to start flash Samsung Galaxy Alpha SM-G850S.
- A successful flash sign will display the message “PASS!” in the upper left of the Odin application.
- After the message appears, Samsung Galaxy Alpha SM-G850S will reboot the system automatically and wait until entering the wizard menu.
- This boot process will take a little longer than usual, so just wait.
Read Also: How To Flash Firmware Samsung Galaxy S5 Sport SM-G860P via Odin
NOTE:
If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Galaxy Alpha SM-G850S, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).
