Firmware Samsung Galaxy Note 4 SM-N910F
Unlock First, When flash failed Click Here
Almost every android would be a problem like bootloop, hang, and slow response. And for example it happened on your Samsung Galaxy Note 4 SM-N910F, you can try to flash with this file rom, to solve the problem. With a flawed Samsung SM-N910F flash will come back to fresh and normal again. Because of the firmware Samsung Galaxy Note 4 SM-N910F that has been replaced with stock rom fresh without error. All you need to know is to backup the data in internal memory. Because this flash will wipe all data in the memory.
With this tutorial How To Flash Firmware Samsung Galaxy Note 4 SM-N910F via Odin can also solve other error problems, such as:
- Forgot Password
- Forget Pattern
- Samsung Galaxy Note 4 SM-N910F Bootloop
- Softbrick
- The touch screen is not sensitive
- low not responsive / Hang
- Virus malware
- Unfortunately, messages has stopped
- Unfortunately, the app has stopped
- Samsung Galaxy Note 4 SM-N910F often restarts itself
- And other errors
Tools for Flash Firmware Samsung Galaxy Note 4 SM-N910F
- Download Firmware File Samsung Galaxy Note 4 SM-N910F Stock Rom, Only for Samsung Galaxy Note 4 SM-N910F
- Odin3 V3.12.5.zip
- Samsung Driver
- USB Cable recommended using original Samsung USB Cable
- PC / Laptop OS Windows recommended Win 7
Read Also: How To Flash Firmware Samsung Galaxy Note 4 SM-N910H via Odin
How To Flash Firmware Samsung Galaxy Note 4 SM-N910F via Odin
- Model type is very important, make sure it has chosen correctly before download.
- After all the materials downloaded, move it to one folder.
- Extract the Samsung Galaxy Note 4 SM-N910F flash file firmware with .zip and you should see the .md5 file.
- Install the Samsung driver and make sure your device is detected by the computer.
- Open and run Odin.
- Turn off your Samsung Galaxy Note 4 SM-N910F.
- Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.
- If it is already in download mode, check on Odin application whether it has been detected or not.
- When the device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).
- Then click the “AP” and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than “AP“, please input it according to its original name “BL“, “CP“, “CSC“.
- And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).
- If everything is ready, click on “Start” to start flash Samsung Galaxy Note 4 SM-N910F.
- A successful flash sign will display the message “PASS!” in the upper left of the Odin application.
- After the message appears, Samsung Galaxy Note 4 SM-N910F will reboot the system automatically and wait until entering the wizard menu.
- This boot process will take a little longer than usual, so just wait.
Read Also: How To Flash Firmware Samsung Galaxy Note 4 SM-N910G via Odin
NOTE:
If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Galaxy Note 4 SM-N910F, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).
