Samsung Galaxy S6 Edge SM-G925K Flash File via Odin

Unlock First, When flash failed Click Here

Bootloop, hang, or error due to forgotten passwords can happen on your Samsung Galaxy S6 Edge SM-G925K. Lots of ways to overcome the problem, one of them is with Samsung Galaxy S6 Edge SM-G925K flash file. With this flashing method, the troubled Samsung Galaxy S6 Edge SM-G925K will be back to normal, because it has been done flashing or replaced with a fresh firmware without error. Keep in mind is the internal memory on android Samsung Galaxy S6 Edge SM-G925K will be wipe, so do backup data before the flash starts.

With this Tutorial “How To Flash Firmware Samsung Galaxy S6 Edge SM-G925K Flash File via Odin” you can also solve other error problems, such as:

1. Samsung Galaxy S6 Edge SM-G925K Forgot Password
2. Samsung Galaxy S6 Edge SM-G925K Forget Pattern
3. Samsung Galaxy S6 Edge SM-G925K Bootloop
4. Samsung Galaxy S6 Edge SM-G925K Softbrick
5. Samsung Galaxy S6 Edge SM-G925K Touch screen is not sensitive
6. Samsung Galaxy S6 Edge SM-G925K Slow not responsive / Hang
7. Samsung Galaxy S6 Edge SM-G925K Virus malware
8. Samsung Galaxy S6 Edge SM-G925K Unfortunately messages has stopped
9. Samsung Galaxy S6 Edge SM-G925K Unfortunately the app has stopped
10. Samsung Galaxy S6 Edge SM-G925K often restarts itself
11. And other errors

• Download Firmware Samsung Galaxy S6 Edge SM-G925K Flash File Stock Rom, Only for Samsung Galaxy S6 Edge SM-G925K
• Odin3 V3.12.5.zip
• Samsung Driver
• USB Cable, recommended to use original Samsung USB Cable
• PC / Laptop OS Windows, recommended Win 7

Read Also:

• Samsung Galaxy S6 Edge SM-G925S Flash File via Odin
• Samsung Galaxy S6 SM-G920S Flash File via Odin

• Use Filter Menu to select your Region (recommend use latest version).
• Model type is very important, make sure it has chosen correctly before download.
• After all materials downloaded, move it into one folder.
• Extract the Samsung Galaxy S6 Edge SM-G925K flash file with .zip and you should see the .md5 file.
• Install  Samsung driver and make sure your device is detected by computer.
• Open and run Odin.
• Turn off your Samsung Galaxy S6 Edge SM-G925K.
• Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.

• If it is already in download mode, check on Odin application whether it has been detected or not.
• When device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).

• Then click the “AP” and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than “AP“, please input it according to its original name “BL“, “CP“, “CSC“.

• And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).

• If everything is ready, click on “Start” to start flash Samsung Galaxy S6 Edge SM-G925K.
• A successful flash sign will display the message “PASS!” in the upper left of the Odin application.

• After the message appears, Samsung Galaxy S6 Edge SM-G925K will reboot system automatically and wait until entering the wizard menu.
• This boot process will take a little longer than usual, so just wait.

• NOTE:

If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Galaxy S6 Edge SM-G925K, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).

Do With Your Own Risk