How To Flash Firmware Samsung Galaxy Alpha SM-G850K via Odin

Categories : Samsung

Unlock First, When flash failed Click Here

Bootloop, hang, or error due to forgotten passwords can happen on your Samsung Galaxy SM-G850K. Lots of ways to overcome the problem, one of them is with this Samsung SM-G850K flash file. With this flashing method, the troubled Samsung Galaxy Alpha SM-G850K will be back to normal, because it has been done flashing or replaced with a fresh firmware Samsung Galaxy Alpha SM-G850K without error. Keep in mind is the internal memory on android Samsung Galaxy Alpha SM-G850K will be wipe, so do backup data before the flash starts.

How To Flash Firmware Samsung Galaxy Alpha SM G850K via Odin

With this tutorial How To Flash Firmware Samsung Galaxy Alpha SM-G850K via Odin can also solve other error problems, such as:

  • Forgot Password
  • Forget Pattern
  • Samsung Galaxy Alpha SM-G850K Bootloop
  • Softbrick
  • The touch screen is not sensitive
  • low not responsive / Hang
  • Virus malware
  • Unfortunately, messages has stopped
  • Unfortunately, the app has stopped
  • Samsung Galaxy Alpha SM-G850K often restarts itself
  • And other errors

Tools for Flash Firmware Samsung Galaxy Alpha SM-G850K

  1. Download Firmware File Samsung Galaxy Alpha SM-G850K Stock Rom, Only for Samsung Galaxy Alpha SM-G850K
  2. Odin3 V3.12.5.zip
  3. Samsung Driver
  4. USB Cable recommended using original Samsung USB Cable
  5. PC / Laptop OS Windows recommended Win 7

Read Also: How To Flash Firmware Samsung Galaxy Alpha SM-G850L via Odin

How To Flash Firmware Samsung Galaxy Alpha SM-G850K via Odin

  1. Model type is very important, make sure it has chosen correctly before download.
  2. After all the materials downloaded, move it to one folder.
  3. Extract the Samsung Galaxy Alpha SM-G850K flash file firmware with .zip and you should see the .md5 file.
  4. Install the Samsung driver and make sure your device is detected by the computer.
  5. Open and run Odin.
  6. Turn off your Samsung Galaxy Alpha SM-G850K.
  7. Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.How To Flash Firmware Samsung Galaxy Alpha SM-G850K via Odin
  8. If it is already in download mode, check on Odin application whether it has been detected or not.
  9. When the device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).How To Flash Firmware Samsung Galaxy Alpha SM-G850K via Odin
  10. Then click the “AP” and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than “AP“, please input it according to its original name “BL“, “CP“, “CSC“.How To Flash Firmware Samsung Galaxy Alpha SM-G850K via OdinSelect AP
  11. And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).How To Flash Firmware Samsung Galaxy Alpha SM-G850K via Odin
  12. If everything is ready, click on “Start” to start flash Samsung Galaxy Alpha SM-G850K.
  13. A successful flash sign will display the message “PASS!” in the upper left of the Odin application.How To Flash Firmware Samsung Galaxy Alpha SM-G850K via Odin
  14. After the message appears, Samsung Galaxy Alpha SM-G850K will reboot the system automatically and wait until entering the wizard menu.
  15. This boot process will take a little longer than usual, so just wait.

Read Also: How To Flash Firmware Samsung Galaxy Alpha SM-G850S via Odin

NOTE:

If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Galaxy Alpha SM-G850K, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).

Do With Your Own Risk