How To Flash Firmware Samsung Galaxy E7 SM-E7009 via Odin

Categories : Samsung

Unlock Phone, When device is LOCKED Click Here

This page will show you, How To Flash Firmware Samsung Galaxy E7 SM-E7009 via Odin. And on this page you will get official download link flash file of Samsung Galaxy E7 SM-E7009. With Odin as official program from Samsung to execute the firmware.

How To Flash Firmware Samsung Galaxy E7 SM E7009 via Odin

With this Tutorial How To Flash Firmware Samsung Galaxy E7 SM-E7009 Flash File via Odin you can also solve other error problems, such as:

  1. Samsung Galaxy E7 SM-E7009 Forgot Password
  2. Samsung Galaxy E7 SM-E7009 Forget Pattern
  3. Samsung Galaxy E7 SM-E7009 Bootloop
  4. Samsung Galaxy E7 SM-E7009 Softbrick
  5. Samsung Galaxy E7 SM-E7009 Touch screen is not sensitive
  6. Samsung Galaxy E7 SM-E7009 Slow not responsive / Hang
  7. Samsung Galaxy E7 SM-E7009 Virus malware
  8. Samsung Galaxy E7 SM-E7009 Unfortunately messages has stopped
  9. Samsung Galaxy E7 SM-E7009 Unfortunately the app has stopped
  10. Samsung Galaxy E7 SM-E7009 often restarts itself
  11. And other errors

Tools

Read Also:

How To Flash Firmware Samsung Galaxy E7 SM-E7009 via Odin

  • Use Filter Menu to select your Region (recommend use latest version).
  • Model type is very important, make sure it has chosen correctly before download.
  • After all materials downloaded, move it into one folder.
  • Extract the Samsung Galaxy E7 SM-E7009 flash file with .zip and you should see the .md5 file.
  • Install  Samsung driver and make sure your device is detected by computer.
  • Open and run Odin.
  • Turn off your Samsung Galaxy E7 SM-E7009.
  • Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.

How To Flash Firmware Samsung Galaxy E7 SM-E7009 via Odin

  • If it is already in download mode, check on Odin application whether it has been detected or not.
  • When device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).

How To Flash Firmware Samsung Galaxy E7 SM-E7009 via Odin

  • Then click the “AP” and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than “AP“, please input it according to its original name “BL“, “CP“, “CSC“.

How To Flash Firmware Samsung Galaxy E7 SM-E7009 via Odin How To Flash Firmware Samsung Galaxy E7 SM-E7009 via Odin

  • And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).

How To Flash Firmware Samsung Galaxy E7 SM-E7009 via Odin

  • If everything is ready, click on “Start” to start flash Samsung Galaxy E7 SM-E7009.
  • A successful flash sign will display the message “PASS!” in the upper left of the Odin application.

How To Flash Firmware Samsung Galaxy E7 SM-E7009 via Odin

  • After the message appears, Samsung Galaxy E7 SM-E7009 will reboot system automatically and wait until entering the wizard menu.
  • This boot process will take a little longer than usual, so just wait.
  • NOTE:

If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Galaxy E7 SM-E7009, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).

Do With Your Own Risk