How To Flash Firmware Samsung Galaxy Gear SM-R380 via Odin

Categories : Samsung

Unlock First, When flash failed Click Here

Bootloop, hang, or error due to forgotten passwords can happen on your Samsung Galaxy Gear SM-R380. Lots of ways to overcome the problem, one of them is with this flash file. With this flashing method, the troubled Samsung SM-R380 will be back to normal, because it has been done flashing or replaced with a fresh firmware Samsung Galaxy Gear SM-R380 without error. Keep in mind is the internal memory on android Samsung Galaxy Gear SM-R380 will be wipe, so do backup data before the flash starts.

How To Flash Firmware Samsung Galaxy Gear SM R380 via Odin

With this tutorial How To Flash Firmware Samsung Galaxy Gear SM-R380 via Odin you can also solve other error problems, such as:

  1. Forgot Password
  2. Forget Pattern
  3. Samsung Galaxy Gear SM-R380 Bootloop
  4. Softbrick
  5. The touch screen is not sensitive
  6. Slow not responsive / Hang
  7. Virus malware
  8. Unfortunately, messages has stopped
  9. Unfortunately, the app has stopped
  10. often restarts itself
  11. And other errors

Tools for Flash Firmware Samsung Galaxy Gear SM-R380

  1. Download Firmware File Samsung Galaxy Gear SM-R380 Stock Rom, Only for Samsung Galaxy Gear SM-R380
  2. Odin3 V3.12.5.zip
  3. Samsung Driver
  4. USB Cable recommended using original Samsung USB Cable
  5. PC / Laptop OS Windows recommended Win 7

Read Also: How To Flash Firmware Samsung Galaxy Note 4 SM-N910F via Odin

How To Flash Firmware Samsung Galaxy Gear SM-R380 via Odin

  1. Use Filter Menu to select your Region (recommend using the latest version).
  2. Model type is very important, make sure it has chosen correctly before download.
  3. After all, the materials downloaded, move it into one folder.
  4. Extract the flash file with .zip and you should see the .md5 file.
  5. Install the Samsung driver and make sure your device is detected by the computer.
  6. Open and run Odin.
  7. Turn off your Samsung Galaxy Gear SM-R380.
  8. Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.

    NOTE: use this method to enter download mode.
    1. Restart your Samsung Galaxy Gear SM-R380, wait until Samsung screen disappear. When the logo are blur, press Power button 3-5 seconds and release. (when phone is on).
    2. Press Power button 3-5 seconds, holding until you enter recovery selection. Scroll down and select Download. (recommended)
    3. Use minimal adb with “adb reboot bootloader” or “adb reboot fastboot“.

  9. If it is already in download mode, check on Odin application whether it has been detected or not.
  10. When the device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).How To Flash Firmware Samsung Galaxy Gear SM-R380 via Odin
  11.  Then click the “AP” and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than “AP“, please input it according to its original name “BL“, “CP“, “CSC“.
    How To Flash Firmware Samsung Galaxy Gear SM-R380 via Odin How To Flash Firmware Samsung Galaxy Gear SM-R380 via Odin
  12. And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).
    How To Flash Firmware Samsung Galaxy Gear SM-R380 via Odin
  13. If everything is ready, click on “Start” to start flash Samsung Galaxy Gear SM-R380.
  14. A successful flash sign will display the message “PASS!” in the upper left of the Odin application.
    How To Flash Firmware Samsung Galaxy Gear SM-R380 via Odin
  15. After the message appears, Samsung Galaxy Gear SM-R380 will reboot the system automatically and wait until entering the wizard menu.
  16. This boot process will take a little longer than usual, so just wait.

Read Also: How To Flash Firmware Samsung Galaxy Note 4 SM-N910H via Odin

  • NOTE:

If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Galaxy Gear SM-R380, go into recovery by above method, then choose wipe menu (cache, data, dalvik cache).

Do With Your Own Risk
Popular Search:
  • gear 2 stock rom odin
  • gear s2 R380 firmware download