How To Flash Firmware Samsung Galaxy S5 SM-G900I via Odin
Unlock First, When flash failed Click Here
The best way to cope with android problems such as bootloop or hang because of the virus. You can try with Samsung Galaxy S5 SM-G900I flash file. If that happens on your SM-G900I, you can try this flash. This will wipe all data in internal memory. Because it will replace with fresh firmware Samsung Galaxy S5 SM-G900I stock rom without any problems. So before flashing on this Samsung Galaxy S5 SM-G900I, backup important data first to the PC or internal memory.
With this tutorial How To Flash Firmware Samsung Galaxy S5 SM-G900I via Odin can also solve other error problems, such as:
- Forgot Password
- Forget Pattern
- Samsung Galaxy S5 SM-G900I Bootloop
- Softbrick
- The touch screen is not sensitive
- low not responsive / Hang
- Virus malware
- Unfortunately, messages has stopped
- Unfortunately, the app has stopped
- Samsung Galaxy S5 SM-G900I often restarts itself
- And other errors
Tools for Flash Firmware Samsung Galaxy S5 SM-G900I
- Download Firmware File Samsung Galaxy S5 SM-G900I Stock Rom, Only for Samsung Galaxy S5 SM-G900I
- Odin3 V3.12.5.zip
- Samsung Driver
- USB Cable recommended using original Samsung USB Cable
- PC / Laptop OS Windows recommended Win 7
Read Also: How To Flash Firmware Samsung Galaxy S5 SM-G900H via Odin
How To Flash Firmware Samsung Galaxy S5 SM-G900I via Odin
- Model type is very important, make sure it has chosen correctly before download.
- After all the materials downloaded, move it to one folder.
- Extract the Samsung Galaxy S5 SM-G900I flash file firmware with .zip and you should see the .md5 file.
- Install the Samsung driver and make sure your device is detected by the computer.
- Open and run Odin.
- Turn off your Samsung Galaxy S5 SM-G900I.
- Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.
- If it is already in download mode, check on Odin application whether it has been detected or not.
- When the device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).
- Then click the “AP” and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than “AP“, please input it according to its original name “BL“, “CP“, “CSC“.
- And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).
- If everything is ready, click on “Start” to start flash Samsung Galaxy S5 SM-G900I.
- A successful flash sign will display the message “PASS!” in the upper left of the Odin application.
- After the message appears, Samsung Galaxy S5 SM-G900I will reboot the system automatically and wait until entering the wizard menu.
- This boot process will take a little longer than usual, so just wait.
Read Also: How To Flash Firmware Samsung Galaxy S5 SM-G900FQ via Odin
NOTE:
If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Galaxy S5 SM-G900I, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).
