Firmware Samsung Galaxy S5 SM-G900L
Unlock First, When flash failed Click Here
Bootloop, hang, or error due to forgotten passwords can happen on your Samsung SM-G900L. Lots of ways to overcome the problem, one of them is with this Samsung Galaxy S5 SM-G900L flash file. With this flashing method, the troubled Samsung SM-G900L will be back to normal, because it has been done flashing or replaced with a fresh firmware Samsung Galaxy S5 SM-G900L without error. Keep in mind is the internal memory on android Samsung SM-G900L will be wipe, so do backup data before the flash starts.
With this tutorial How To Flash Firmware Samsung Galaxy S5 SM-G900L via Odin can also solve other error problems, such as:
- Forgot Password
- Forget Pattern
- Samsung Galaxy S5 SM-G900L Bootloop
- Softbrick
- The touch screen is not sensitive
- low not responsive / Hang
- Virus malware
- Unfortunately, messages has stopped
- Unfortunately, the app has stopped
- Samsung Galaxy S5 SM-G900L often restarts itself
- And other errors
Tools for Flash Firmware Samsung Galaxy S5 SM-G900L Flash File
- Download Firmware File Samsung Galaxy S5 SM-G900L Stock Rom, Only for Samsung Galaxy S5 SM-G900L
- Odin3 V3.12.5.zip
- Samsung Driver
- USB Cable recommended using original Samsung USB Cable
- PC / Laptop OS Windows recommended Win 7
Read Also: How To Flash Firmware Samsung Galaxy S5 SM-G900K via Odin
How To Flash Firmware Samsung Galaxy S5 SM-G900L Flash File via Odin
- Model type is very important, make sure it has chosen correctly before download.
- After all the materials downloaded, move it to one folder.
- Extract the firmware Samsung Galaxy S5 SM-G900L flash file with .zip and you should see the .md5 file.
- Install the Samsung driver and make sure your device is detected by the computer.
- Open and run Odin.
- Turn off your Samsung Galaxy S5 SM-G900L.
- Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.
- If it is already in download mode, check on Odin application whether it has been detected or not.
- When the device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).
- Then click the “AP” and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than “AP“, please input it according to its original name “BL“, “CP“, “CSC“.
- And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).
- If everything is ready, click on “Start” to start flashing Samsung Galaxy S5 SM-G900L.
- A successful flash sign will display the message “PASS!” in the upper left of the Odin application.
- After the message appears, Samsung Galaxy S5 SM-G900L will reboot the system automatically and wait until entering the wizard menu.
- This boot process will take a little longer than usual, so just wait.
- Finally, flash firmware Samsung Galaxy S5 SM-G900L flash file via Odin is done.
Read Also: How To Flash Firmware Samsung Galaxy S5 SM-G900I via Odin
NOTE:
If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Galaxy S5 SM-G900L, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).
