How To Flash Firmware Samsung Galaxy Tab Active SM-T360 via Odin

Unlock First, When flash failed Click Here

The easiest way to tackle the Samsung Galaxy Tab Active SM-T360 bootloop is with this flash file. Because this flash file will replace the damaged system files cause bootloop with fresh new file. By using Samsung Galaxy Tab Active SM-T360 Flash File stock rom will be like new. Keep in mind before flashing, the data stored in the internal memory will be wipe and lost. So please backup first important data to external memory or directly to PC for safe.

With this Tutorial “How To Flash Firmware Samsung Galaxy Tab Active SM-T360 Flash File via Odin“ you can also solve other error problems, such as:

1. Samsung Galaxy Tab Active SM-T360 Forgot Password
2. Samsung Galaxy Tab Active SM-T360 Forget Pattern
3. Samsung Galaxy Tab Active SM-T360 Bootloop
4. Samsung Galaxy Tab Active SM-T360 Softbrick
5. Samsung Galaxy Tab Active SM-T360 Touch screen is not sensitive
6. Samsung Galaxy Tab Active SM-T360 Slow not responsive / Hang
7. Samsung Galaxy Tab Active SM-T360 Virus malware
8. Samsung Galaxy Tab Active SM-T360 Unfortunately messages has stopped
9. Samsung Galaxy Tab Active SM-T360 Unfortunately the app has stopped
10. Samsung Galaxy Tab Active SM-T360 often restarts itself
11. And other errors

Tools

• Download Firmware Samsung Galaxy Tab Active SM-T360 Flash File Stock Rom. Only for Samsung Galaxy Tab Active SM-T360
• Odin3 V3.12.5.zip
• Samsung Driver
• USB Cable, recommended to use original Samsung USB Cable
• PC / Laptop OS Windows, recommended Win 7

Read Also:

• How To Flash Firmware Samsung Galaxy J1 SM-J100FN via Odin
• How To Flash Firmware Samsung Galaxy Mega 2 SM-G750F via Odin

How To Flash Firmware Samsung Galaxy Tab Active SM-T360 via Odin

• Use Filter Menu to select your Region (recommend use latest version).
• Model type is very important, make sure it has chosen correctly before download.
• After all materials downloaded, move it into one folder.
• Extract the Samsung Galaxy Tab Active SM-T360 flash file with .zip and you should see the .md5 file.
• Install  Samsung driver and make sure your device is detected by computer.
• Open and run Odin.
• Turn off your Samsung Galaxy Tab Active SM-T360.
• Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.

• If it is already in download mode, check on Odin application whether it has been detected or not.
• When device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).

• Then click the “AP” and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than “AP“, please input it according to its original name “BL“, “CP“, “CSC“.

• And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).

• If everything is ready, click on “Start” to start flash Samsung Galaxy Tab Active SM-T360.
• A successful flash sign will display the message “PASS!” in the upper left of the Odin application.

• After the message appears, Samsung Galaxy Tab Active SM-T360 will reboot system automatically and wait until entering the wizard menu.
• This boot process will take a little longer than usual, so just wait.

• NOTE:

If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Galaxy Tab Active SM-T360, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).

Do With Your Own Risk