How To Flash Samsung Galaxy S7 Edge SM-G935W8 via Odin

Unlock First, When flash failed Click Here

To solve or fix the Samsung Galaxy S7 Edge SM-G935W8 android problem like bootloop or hang, forget the pattern, you can try this flash file as a solution. Because in this way will replace the file system Samsung Galaxy S7 Edge SM-G935W8 problem with fresh or new. Just remember before flashing is backup important in the internal memory. Because after flash finished, the data will be wipe and lost. You can download Samsung Galaxy S7 Edge SM-G935W8 firmware on link in the middle post. Make sure this firmware is same with your device Samsung Galaxy S7 Edge SM-G935W8. Don’t forget to install Samsung Galaxy S7 Edge SM-G935W8 driver before connect to PC to flash.

With this Tutorial “How To Flash Samsung Galaxy S7 Edge SM-G935W8 via Odin“ you can also solve other error problems, such as:

1. Samsung Galaxy S7 Edge SM-G935W8 Forgot Password
2. Samsung Galaxy S7 Edge SM-G935W8 Forget Pattern
3. Samsung Galaxy S7 Edge SM-G935W8 Bootloop
4. Samsung Galaxy S7 Edge SM-G935W8 Softbrick
5. Samsung Galaxy S7 Edge SM-G935W8 Touch screen is not sensitive
6. Samsung Galaxy S7 Edge SM-G935W8 Slow not responsive / Hang
7. Samsung Galaxy S7 Edge SM-G935W8 Virus malware
8. Samsung Galaxy S7 Edge SM-G935W8 Unfortunately messages has stopped
9. Samsung Galaxy S7 Edge SM-G935W8 Unfortunately the app has stopped
10. Samsung Galaxy S7 Edge SM-G935W8 often restarts itself
11. And other errors

Tools

• Download Firmware Samsung Galaxy S7 Edge SM-G935W8 Flash File Stock Rom. Only for Samsung Galaxy S7 Edge SM-G935W8
• Odin3 V3.12.5.zip
• Samsung Driver
• USB Cable, recommended to use original Samsung USB Cable
• PC / Laptop OS Windows, recommended Win 7

Read Also:

• How To Flash Samsung Galaxy J4 SM-J400F via Odin
• How To Flash Samsung Galaxy J3 Pro SM-J330G via Odin

How To Flash Samsung Galaxy S7 Edge SM-G935W8 via Odin

• Use Filter Menu to select your Region (recommend use latest version).
• Model type is very important, make sure it has chosen correctly before download.
• After all materials downloaded, move it into one folder.
• Extract the Samsung Galaxy S7 Edge SM-G935W8 flash file with .zip and you should see the .md5 file.
• Install  Samsung driver and make sure your device is detected by computer.
• Open and run Odin.
• Turn off your Samsung Galaxy S7 Edge SM-G935W8.
• Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.

• If it is already in download mode, check on Odin application whether it has been detected or not.
• When device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).

• Then click the “AP” and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than “AP“, please input it according to its original name “BL“, “CP“, “CSC“.

• And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).

• If everything is ready, click on “Start” to start flash Samsung Galaxy S7 Edge SM-G935W8.
• A successful flash sign will display the message “PASS!” in the upper left of the Odin application.

• After the message appears, Samsung Galaxy S7 Edge SM-G935W8 will reboot system automatically and wait until entering the wizard menu.
• This boot process will take a little longer than usual, so just wait.

• NOTE:

If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Galaxy S7 Edge SM-G935W8, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).

Do With Your Own Risk