Samsung Galaxy J2 PRO SM-J210F Firmware and Flash via Odin

Categories : Samsung

Unlock First, When flash failed Click Here

Flash is one way to solve problems on android. If the Samsung Galaxy J2 PRO SM-J210F bootloop because of the malware virus, you can try this flash file to solve the problem. This will replace system that are corrupted with fresh Samsung Galaxy J2 PRO SM-J210F firmware flash file stock rom. But data stored in internal memory will also be wipe after flashing. So do backups before flashing Samsung Galaxy J2 PRO SM-J210F. And don’t forget to install Samsung Galaxy J2 PRO SM-J210F driver before connect to PC.

Samsung Galaxy J2 PRO SM J210F Firmware and Flash via Odin

With this Tutorial Samsung Galaxy J2 PRO SM-J210F Firmware and Flash via Odin you can also solve other error problems, such as:

  1. Samsung Galaxy J2 PRO SM-J210F Forgot Password
  2. Samsung Galaxy J2 PRO SM-J210F Forget Pattern
  3. Samsung Galaxy J2 PRO SM-J210F Bootloop
  4. Samsung Galaxy J2 PRO SM-J210F Softbrick
  5. Samsung Galaxy J2 PRO SM-J210F Touch screen is not sensitive
  6. Samsung Galaxy J2 PRO SM-J210F Slow not responsive / Hang
  7. Samsung Galaxy J2 PRO SM-J210F Virus malware
  8. Samsung Galaxy J2 PRO SM-J210F Unfortunately messages has stopped
  9. Samsung Galaxy J2 PRO SM-J210F Unfortunately the app has stopped
  10. Samsung Galaxy J2 PRO SM-J210F often restarts itself
  11. And other errors

Tools

Read Also:

Samsung Galaxy J2 PRO SM-J210F Firmware and Flash via Odin

  • Use Filter Menu to select your Region (recommend use latest version).
  • Model type is very important, make sure it has chosen correctly before download.
  • After all materials downloaded, move it into one folder.
  • Extract the Samsung Galaxy J2 PRO SM-J210F firmware flash file with .zip and you should see the .md5 file.
  • Install  Samsung driver and make sure your device is detected by computer.
  • Open and run Odin.
  • Turn off your Samsung Galaxy J2 PRO SM-J210F.
  • Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.

Samsung Galaxy J2 PRO SM-J210F Firmware and Flash via Odin

  • If it is already in download mode, check on Odin application whether it has been detected or not.
  • When device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).

Samsung Galaxy J2 PRO SM-J210F Flash File via Odin

  • Then click the “AP” and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than “AP“, please input it according to its original name “BL“, “CP“, “CSC“.

Samsung Galaxy J2 PRO SM-J210F Firmware and Flash via Odin Samsung Galaxy J2 PRO SM-J210F Firmware and Flash via Odin

  • And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).

Samsung Galaxy J2 PRO SM-J210F Firmware and Flash via Odin

  • If everything is ready, click on “Start” to start flash Samsung Galaxy J2 PRO SM-J210F.
  • A successful flash sign will display the message “PASS!” in the upper left of the Odin application.

Samsung Galaxy J2 PRO SM-J210F Firmware and Flash via Odin

  • After the message appears, Samsung Galaxy J2 PRO SM-J210F will reboot system automatically and wait until entering the wizard menu.
  • This boot process will take a little longer than usual, so just wait.
  • NOTE:

If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Galaxy J2 PRO SM-J210F, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).

Do With Your Own Risk

Popular Search:
  • j210f pro flash file
  • j2 pro ap file download for odin
  • odin for samsung j210f