Samsung Galaxy J2 SM-J200M Firmware Download and Flash via Odin
Unlock First, When flash failed Click Here
Almost every android would be a problem like bootloop, hang, and slow response. And for example it happened on your Samsung Galaxy J2 SM-J200M, you can try to flash with this file rom, to solve the problem. With a flawed Samsung Galaxy J2 SM-J200M flash will come back to fresh and normal again. Because the firmware that has been replace with Samsung Galaxy J2 SM-J200M flash file stock rom fresh without error. All you need to know is to backup the data in internal memory. Because this flash will wipe all data in the memory. Download official Samsung Galaxy J2 SM-J200M firmware by updato. Make sure your device is same with this firmware and don’t forget to filter your region.
With this Tutorial Samsung Galaxy J2 SM-J200M Firmware and Flash via Odin you can also solve other error problems, such as:
- Samsung Galaxy J2 SM-J200M Forgot Password
- Samsung Galaxy J2 SM-J200M Forget Pattern
- Samsung Galaxy J2 SM-J200M Bootloop
- Samsung Galaxy J2 SM-J200M Stuck on Logo
- Samsung Galaxy J2 SM-J200M Softbrick
- Samsung Galaxy J2 SM-J200M Touch screen is not sensitive
- Samsung Galaxy J2 SM-J200M Slow not responsive / Hang
- Samsung Galaxy J2 SM-J200M Virus malware
- Samsung Galaxy J2 SM-J200M Unfortunately messages has stopped
- Samsung Galaxy J2 SM-J200M Unfortunately the app has stopped
- Samsung Galaxy J2 SM-J200M often restarts itself
- And other errors
Tools
- Download Firmware Samsung Galaxy J2 SM-J200M Flash File Stock Rom, Only for Samsung Galaxy J2 SM-J200M
- Odin3 V3.12.5.zip
- Samsung Driver
- USB Cable, recommended to use original Samsung USB Cable
- PC / Laptop OS Windows, recommended Win 7
Read Also:
- Samsung Galaxy J2 SM-J200Y Firmware Download and Flash via Odin
- Samsung Galaxy J3 SM-J320P Firmware Download and Flash via Odin
Samsung Galaxy J2 SM-J200M Firmware and Flash via Odin
- Use Filter Menu to select your Region (recommend use latest version).
- Model type is very important, make sure it has chosen correctly before download.
- After all materials downloaded, move it into one folder.
- Extract the Samsung Galaxy J2 SM-J200M firmware flash file with .zip and you should see the .md5 file.
- Install Samsung driver and make sure your device is detected by computer.
- Open and run Odin.
- Turn off your Samsung Galaxy J2 SM-J200M.
- Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.
- If it is already in download mode, check on Odin application whether it has been detected or not.
- When device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).
- Then click the AP and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than AP, please input it according to its original name BL, CP, CSC (optional files).
- And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).
- If everything is ready, click on “Start” to start flash Samsung Galaxy J2 SM-J200M.
- A successful flash sign will display the message “PASS!” in the upper left of the Odin application.
- After the message appears, Samsung Galaxy J2 SM-J200M will reboot system automatically and wait until enter the wizard menu.
- Booting process will take 5-15 minutes even more, so just wait.
- Finally, flash Samsung Galaxy J2 SM-J200M via Odin flashtool is done.
NOTE:
If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Galaxy J2 SM-J200M, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).
Do With Your Own Risk
