Samsung Galaxy S3 Mini VE GT-I8200 Firmware

Categories : Samsung

Unlock First, When flash failed Click Here

How to Flash Samsung Galaxy S3 Mini VE GT-I8200 Firmware via Odin (Flash File)? The easiest way to tackle the Samsung S3 Mini Value Edition bootloop is with this flash file. Because this flash file will replace the damaged system files cause bootloop with the fresh new file. By using Samsung GT-I8200 firmware Stock ROM will be like new.

Keep in mind before flashing, the data stored in the internal memory will be wipe and lost. So please backup the first important data to external memory or directly to PC for safety.

How to Flash Samsung Galaxy S3 Mini VE GT-I8200 Firmware via Odin (Flash File)

With this tutorial How To Flash Firmware Samsung Galaxy S3 Mini VE GT-I8200 via Odin can also solve other error problems, such as:

  • Forgot Password
  • Forget Pattern
  • Samsung GT-I8200 Bootloop
  • Softbrick
  • The touch screen is not sensitive
  • Stuck at Logo
  • Blank screen
  • Slow not responsive / Hang
  • Samsung only vibrate
  • Due to a malware virus
  • Unfortunately, messages has stopped
  • Unfortunately, the app has stopped
  • Often restarts itself
  • And other errors

Read Also: How to Flash Samsung Galaxy S3 Mini GT-I8190T Firmware via Odin

Tools and Firmware Download

  1. Odin3 V3.12.5.zip
  2. Samsung Driver
  3. USB Cable recommended using the original Samsung USB Cable
  4. PC / Laptop OS Windows recommended Win 7
  5. Stuck on FRP? Try this way How to Bypass FRP on Samsung

Read Also: Samsung GT-I8190N Firmware

How To Flash Samsung Galaxy S3 Mini VE GT-I8200 Firmware via Odin

  1. Model type is very important, make sure it has been chosen correctly before download.
  2. After all the materials are downloaded, move them to one folder.
  3. Extract the Samsung GT-I8200 flash file with .zip and you should see the .md5 file.
  4. Install the Samsung driver and make sure your computer detects the device.
  5. Open and run Odin.
  6. Turn off your device.
  7. Then go to Download Mode, press and hold down “Volume Down + Home + Power” together, you will see a “Warning” message, then you should quickly press Volume Up.Samsung Download Mode
  8. If it is already in download mode, check on the Odin application whether it has been detected or not.
  9. When connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).Device Added to Odin Flash Tool
  10. Then click the “AP” and locate the .md5 file earlier in the extracted folder. If there is more than “AP” files, please input it according to its original name “BL“, “CP“, “CSC“.Samsung Galaxy S3 Mini VE GT-I8200 Flash FIleAP Samsung Galaxy S3 Mini VE GT-I8200
  11. And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).Checklist Auto Reboot and F. Reset Time
  12. If everything is ready, click on “Start” to start flashing.
  13. A successful flash sign will display the message “PASS!” in the upper left of the Odin application.Flash Samsung Galaxy S3 Mini VE GT-I8200 Firmware via Odin Success
  14. After the message appears, the device will reboot the system automatically and wait until entering the wizard menu.
  15. This boot process will take a little longer than usual, so just wait.
  16. Flash Samsung Galaxy S3 Mini VE GT-I8200 finally is done.

Read Also: Download Samsung Galaxy S3 Mini GT-I8190L Flash File

NOTE:

If booting more than 10 minutes or get bootloop, you should wipe reset manual through recovery. Turn off your Samsung, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).

Do With Your Own Risk