Home»Samsung»Samsung Galaxy S6 Edge SM-G925K Flash File via Odin

Samsung Galaxy S6 Edge SM-G925K Flash File via Odin

Categories : Samsung

Unlock First, When flash failed Click Here

Bootloop, hang, or error due to forgotten passwords can happen on your Samsung Galaxy S6 Edge SM-G925K. Lots of ways to overcome the problem, one of them is with Samsung Galaxy S6 Edge SM-G925K flash file. With this flashing method, the troubled Samsung Galaxy S6 Edge SM-G925K will be back to normal, because it has been done flashing or replaced with a fresh firmware without error. Keep in mind is the internal memory on android Samsung Galaxy S6 Edge SM-G925K will be wipe, so do backup data before the flash starts.

Samsung Galaxy S6 Edge SM G925K Flash File via Odin

With this Tutorial “How To Flash Firmware Samsung Galaxy S6 Edge SM-G925K Flash File via Odin” you can also solve other error problems, such as:

  1. Samsung Galaxy S6 Edge SM-G925K Forgot Password
  2. Samsung Galaxy S6 Edge SM-G925K Forget Pattern
  3. Samsung Galaxy S6 Edge SM-G925K Bootloop
  4. Samsung Galaxy S6 Edge SM-G925K Softbrick
  5. Samsung Galaxy S6 Edge SM-G925K Touch screen is not sensitive
  6. Samsung Galaxy S6 Edge SM-G925K Slow not responsive / Hang
  7. Samsung Galaxy S6 Edge SM-G925K Virus malware
  8. Samsung Galaxy S6 Edge SM-G925K Unfortunately messages has stopped
  9. Samsung Galaxy S6 Edge SM-G925K Unfortunately the app has stopped
  10. Samsung Galaxy S6 Edge SM-G925K often restarts itself
  11. And other errors
Tools

Read Also:

Samsung Galaxy S6 Edge SM-G925K Flash File via Odin
  • Use Filter Menu to select your Region (recommend use latest version).
  • Model type is very important, make sure it has chosen correctly before download.
  • After all materials downloaded, move it into one folder.
  • Extract the Samsung Galaxy S6 Edge SM-G925K flash file with .zip and you should see the .md5 file.
  • Install  Samsung driver and make sure your device is detected by computer.
  • Open and run Odin.
  • Turn off your Samsung Galaxy S6 Edge SM-G925K.
  • Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.

Samsung Galaxy S6 Edge SM-G925K Flash File via Odin

  • If it is already in download mode, check on Odin application whether it has been detected or not.
  • When device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).

Samsung Galaxy S6 Edge SM-G925K Flash File via Odin

  • Then click the “AP” and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than “AP“, please input it according to its original name “BL“, “CP“, “CSC“.

How To Flash Firmware Samsung Galaxy S6 Edge SM-G925K via Odin Samsung Galaxy S6 Edge SM-G925K Flash File via Odin

  • And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).

Samsung Galaxy S6 Edge SM-G925K Flash File via Odin

  • If everything is ready, click on “Start” to start flash Samsung Galaxy S6 Edge SM-G925K.
  • A successful flash sign will display the message “PASS!” in the upper left of the Odin application.

Samsung Galaxy S6 Edge SM-G925K Flash File via Odin

  • After the message appears, Samsung Galaxy S6 Edge SM-G925K will reboot system automatically and wait until entering the wizard menu.
  • This boot process will take a little longer than usual, so just wait.
  • NOTE:

If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Galaxy S6 Edge SM-G925K, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).

Do With Your Own Risk

Related Posts