Samsung Galaxy S6 SM-G9200 Flash File via Odin

Unlock First, When flash failed Click Here

Flash is one way to solve problems on android. If the Samsung Galaxy S6 SM-G9200 bootloop because of the malware virus, you can try this flash file to solve the problem. This will replace system that are corrupted with fresh firmware Samsung Galaxy S6 SM-G9200 flash file stock rom. But data stored in internal memory will also be wipe after flashing. So do backups before flashing Samsung Galaxy S6 SM-G9200.

With this Tutorial “How To Flash Firmware Samsung Galaxy S6 SM-G9200 Flash File via Odin” you can also solve other error problems, such as:

1. Samsung Galaxy S6 SM-G9200 Forgot Password
2. Samsung Galaxy S6 SM-G9200 Forget Pattern
3. Samsung Galaxy S6 SM-G9200 Bootloop
4. Samsung Galaxy S6 SM-G9200 Softbrick
5. Samsung Galaxy S6 SM-G9200 Touch screen is not sensitive
6. Samsung Galaxy S6 SM-G9200 Slow not responsive / Hang
7. Samsung Galaxy S6 SM-G9200 Virus malware
8. Samsung Galaxy S6 SM-G9200 Unfortunately messages has stopped
9. Samsung Galaxy S6 SM-G9200 Unfortunately the app has stopped
10. Samsung Galaxy S6 SM-G9200 often restarts itself
11. And other errors

• Download Firmware Samsung Galaxy S6 SM-G9200 Stock Rom, Only for Samsung Galaxy S6 SM-G9200
• Odin3 V3.12.5.zip
• Samsung Driver
• USB Cable, recommended to use original Samsung USB Cable
• PC / Laptop OS Windows, recommended Win 7

Read Also:

• Alcatel OneTouch Idol 6030A Flash File via Flash Tool
• Alcatel OneTouch Idol Alpha 6032 Flash File via Flash Tool

• Use Filter Menu to select your Region (recommend use latest version).
• Model type is very important, make sure it has chosen correctly before download.
• After all materials downloaded, move it into one folder.
• Extract the Samsung Galaxy S6 SM-G9200 flash file with .zip and you should see the .md5 file.
• Install  Samsung driver and make sure your device is detected by computer.
• Open and run Odin.
• Turn off your Samsung Galaxy S6 SM-G9200.
• Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.

• If it is already in download mode, check on Odin application whether it has been detected or not.
• When device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).

• Then click the “AP” and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than “AP“, please input it according to its original name “BL“, “CP“, “CSC“.

• And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).

• If everything is ready, click on “Start” to start flash Samsung Galaxy S6 SM-G9200.
• A successful flash sign will display the message “PASS!” in the upper left of the Odin application.

• After the message appears, Samsung Galaxy S6 SM-G9200 will reboot system automatically and wait until entering the wizard menu.
• This boot process will take a little longer than usual, so just wait.

• NOTE:

If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Galaxy S6 SM-G9200, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).

Do With Your Own Risk