Samsung Galaxy Xcover 2 GT-S7710L Firmware

Categories : Samsung

Unlock First, When flash failed Click Here

How to Flash Samsung Galaxy Xcover 2 GT-S7710L Firmware via Odin (Flash File)? This flash file stock ROM tutorial is used to solve various problems that occur on Samsung. As an example, if there is a bootloop or hang because of the virus, you can try this flashing way to overcome the bootloop and other problems on Samsung Xcover 2 software. The important thing to remember for this tutorial is to backup data stored in internal memory. Because this flash will wipe the stored data and replaced it with the new firmware file. Get Samsung Galaxy Xcover 2 GT-S7710L firmware on the middle post. Don’t forget to install the USB driver first before the flash.

How to Flash Samsung Galaxy Xcover 2 GT-S7710L Firmware via Odin (Flash File)

With this tutorial How To Flash Firmware Samsung Galaxy Xcover 2 GT-S7710L via Odin can also solve other error problems, such as:

  • Forgot Password
  • Forget Pattern
  • Samsung GT-S7710L Bootloop
  • Softbrick
  • The touch screen is not sensitive
  • Stuck at Logo
  • Blank screen
  • Slow not responsive / Hang
  • Samsung only vibrate
  • Due to a malware virus
  • Unfortunately, messages has stopped
  • Unfortunately, the app has stopped
  • Often restarts itself
  • And other errors

Read Also: How to Flash Samsung Galaxy Trend 2 GT-S7898I Firmware via Odin

Tools and Firmware Download

  1. Odin3 V3.12.5.zip
  2. Samsung Driver
  3. USB Cable recommended using the original Samsung USB Cable
  4. PC / Laptop OS Windows recommended Win 7
  5. Stuck on FRP? Try this way How to Bypass FRP on Samsung

Read Also: Samsung SM-A217N Firmware

How To Flash Samsung Galaxy Xcover 2 GT-S7710L Firmware via Odin

  1. Model type is very important, make sure it has been chosen correctly before download.
  2. After all the materials are downloaded, move them to one folder.
  3. Extract the Samsung GT-S7710L flash file with .zip and you should see the .md5 file.
  4. Install the Samsung driver and make sure your computer detects the device.
  5. Open and run Odin.
  6. Turn off your device.
  7. Then go to Download Mode, press and hold down “Volume Down + Home + Power” together, you will see a “Warning” message, then you should quickly press Volume Up.Samsung Download Mode
  8. If it is already in download mode, check on the Odin application whether it has been detected or not.
  9. When connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).Device Added to Odin Flash Tool
  10. Then click the “AP” and locate the .md5 file earlier in the extracted folder. If there is more than “AP” files, please input it according to its original name “BL“, “CP“, “CSC“.Samsung Galaxy Xcover 2 GT-S7710L Flash FIleAP Samsung Galaxy Xcover 2 GT-S7710L
  11. And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).Checklist Auto Reboot and F. Reset Time
  12. If everything is ready, click on “Start” to start flashing.
  13. A successful flash sign will display the message “PASS!” in the upper left of the Odin application.Flash Samsung Galaxy Xcover 2 GT-S7710L Firmware via Odin Success
  14. After the message appears, the device will reboot the system automatically and wait until entering the wizard menu.
  15. This boot process will take a little longer than usual, so just wait.
  16. Flash Samsung Galaxy Xcover 2 GT-S7710L finally is done.

Read Also: Download Huawei Y625-L01 Flash File

NOTE:

If booting more than 10 minutes or get bootloop, you should wipe reset manual through recovery. Turn off your Samsung, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).

Do With Your Own Risk