ZTE V8200 Plus Firmware
Unlock First, When flash failed Click Here
How to Flash ZTE V8200 Plus Firmware via QFIL (Flash File)? To solve or fix the ZTE android problem like bootloop or hang, forget the pattern, you can try this flash file as a solution. Because in this way will replace the file system ZTE problem with fresh or new. Just remember before flashing, you need to backup the important in the internal memory. Because after flash is finished, the data will be wiped and lost.
Because this flash will wipe the entire contents of data stored in the internal memory. With this stock ROM firmware, ZTE will feel as fresh as new.
With this tutorial How to flash ZTE V8200 Plus Firmware via QFIL Tool, you can also solve other error problems, such as:
- Forgot Password
- Stuck on Logo
- Forget Pattern
- ZTE V8200 Plus Bootloop
- Soft Brick
- Blank Screen
- The touch screen is not sensitive
- Slow not responsive / Hang
- Virus malware
- Unfortunately, the app has stopped
- ZTE often restarts itself
- And other errors
Read Also: How to Flash ZTE V9180 Firmware via QFIL
Tools and Firmware Download
- Qualcomm Driver
- QFIL Tool
- Download firmware ZTE_V8200_Plus_4.0.4_QFIL.zip stock ROM via Google Drive
- Bypass Limit Google Drive Work Tutorial follow Bypass Google Drive Download Limit (Quota Exceeded) Error
Read Also: Flash ZTE V769M Firmware
How to Flash ZTE V8200 Plus Firmware via QFIL Tool
- First of all, get all tools and extract them into one folder.
- Install the Qualcomm Driver. If the installation failed, you need to install it manually from the device manager.
- Open the QFIL Tool.
- Make sure the Qualcomm Driver for QFIL is installed correctly and detected on the device manager (COM6 port is my device, may be different on your PC).
- If the installation failed, try this method:
Turn off your device, hold Volume Up + Volume Bottom, and plug your device into PC, wait till the driver is installed and the device is detected, this will appear on the QFIL COM port.
- Extract the ZTE V8200 Plus firmware and make sure you see a file with a .mbn format, similarly as for files like prog_emmc_xxx.mbn, also the important files are rawprogram0.xml or rawprogram2.xml and patch0.xml. Those 3 files are very important (prog_emmc_xxx.mbn, rawprogram0.xml, and patch0.xml), and sometimes the files are not included on the ROM flash file pack, you need to find them manually via google or XDA forum.
- Click menu Flat build then click menu Browse, find the firmware Stock ROM where you extract.
- Find the files prog_emmc_xxx.mbn, then open the .mbn file.
- Click menu Load XML, you will see the file like rawprogram0 with XML format, click open and next click patch0 with the same format and last click open again.
- Now, click the Download button and wait to flash the firmware.
- This process usually taking 5-10 minutes.
- Flash finish will show messages “Download Succeed” and “Finish Download” on the tab menu Status.
- Unplug the cable and turn on your device.
- First booting after flash will take 5-10 minutes. So, just wait until entering the wizard menu.
- Finally, flash ZTE V8200 Plus is done.
Read Also: Download ZTE Blade L2 Single SIM Flash File
With this tutorial on How to Flash ZTE V8200 Plus Firmware via QFIL, you will get a fresh ROM without errors.
