Samsung Galaxy C7 Pro SM-C7010 Firmware and Flash via Odin

Categories : Samsung

Unlock First, When flash failed Click Here

Bootloop, hang, or error due to forgotten passwords can happen on your Samsung Galaxy C7 Pro SM-C7010. Lots of ways to overcome the problem, one of them is with Samsung Galaxy C7 Pro SM-C7010 firmware flash file. With this flashing method, the troubled Samsung Galaxy C7 Pro SM-C7010 will be back to normal, because it has been done flashing or replaced with a fresh firmware without error. Keep in mind is the internal memory on android Samsung Galaxy C7 Pro SM-C7010 will be wipe, so do backup data before the flash starts. Make sure this Samsung Galaxy C7 Pro SM-C7010 firmware is same with your Samsung device. Don’t forget to install Samsung Galaxy C7 Pro SM-C7010 driver before next step.

Samsung Galaxy C7 Pro SM-C7010 Firmware and Flash via Odin

With this Tutorial Samsung Galaxy C7 Pro SM-C7010 Firmware and Flash via Odin you can also solve other error problems, such as:

  1. Samsung Galaxy C7 Pro SM-C7010 Forgot Password
  2. Samsung Galaxy C7 Pro SM-C7010 Forget Pattern
  3. Samsung Galaxy C7 Pro SM-C7010 Bootloop
  4. Samsung Galaxy C7 Pro SM-C7010 Softbrick
  5. Samsung Galaxy C7 Pro SM-C7010 Touch screen is not sensitive
  6. Samsung Galaxy C7 Pro SM-C7010 Slow not responsive / Hang
  7. Samsung Galaxy C7 Pro SM-C7010 Virus malware
  8. Samsung Galaxy C7 Pro SM-C7010 Unfortunately messages has stopped
  9. Samsung Galaxy C7 Pro SM-C7010 Unfortunately the app has stopped
  10. Samsung Galaxy C7 Pro SM-C7010 often restarts itself
  11. And other errors

Tools

Read Also:

Samsung Galaxy C7 Pro SM-C7010 Firmware and Flash via Odin

  • Use Filter Menu to select your Region (recommend use latest version).
  • Model type is very important, make sure it has chosen correctly before download.
  • After all materials downloaded, move it into one folder.
  • Extract the Samsung Galaxy C7 Pro SM-C7010 firmware flash file with .zip and you should see the .md5 file.
  • Install  Samsung driver and make sure your device is detected by computer.
  • Open and run Odin.
  • Turn off your Samsung Galaxy C7 Pro SM-C7010.
  • Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.

Samsung Galaxy C7 Pro SM-C7010 Firmware and Flash via Odin

  • If it is already in download mode, check on Odin application whether it has been detected or not.
  • When device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).

Samsung Galaxy C7 Pro SM-C7010 Flash File via Odin

  • Then click the “AP” and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than “AP“, please input it according to its original name “BL“, “CP“, “CSC“.

Samsung Galaxy C7 Pro SM-C7010 Firmware and Flash via Odin Samsung Galaxy C7 Pro SM-C7010 Firmware and Flash via Odin

  • And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).

Samsung Galaxy C7 Pro SM-C7010 Firmware and Flash via Odin

  • If everything is ready, click on “Start” to start flash Samsung Galaxy C7 Pro SM-C7010.
  • A successful flash sign will display the message “PASS!” in the upper left of the Odin application.

Samsung Galaxy C7 Pro SM-C7010 Firmware and Flash via Odin

  • After the message appears, Samsung Galaxy C7 Pro SM-C7010 will reboot system automatically and wait until entering the wizard menu.
  • This boot process will take a little longer than usual, so just wait.
  • NOTE:

If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Galaxy C7 Pro SM-C7010, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).

Do With Your Own Risk