Huawei Y221-U22 Firmware

Unlock First, When flash failed Click Here

How to Flash Huawei Y221-U22 Firmware via SP Flash Tool? Flash is one way to tackle android the bootloop. For example, Huawei Y221-U22 that the problem occurs or malware virus, you can try this flash file stock rom as a solution to resolve it. You can download Huawei Y221-U22 firmware file via google drive from the link below.

Keep in mind for this flashing, data stored in the internal memory will be lost erased. So try to backup data before flashing Huawei Y221-U22.

With this Tutorial How to Flash Huawei Y221-U22 Firmware via SP Flash Tool, you can also solve other error problems, such as:

• Huawei Y221-U22 Forgot Password
• Huawei Y221-U22 Stuck on Logo
• Forget Pattern
• Huawei Y221-U22 Bootloop
• Soft Brick
• Huawei Y221-U22 Blank Screen
• The touch screen is not sensitive
• Slow not responsive / Hang
• Huawei Y221-U22 hang on Logo
• Virus malware
• Unfortunately, the app has stopped
• Huawei Y221-U22 often restarts itself
• And other errors

Tools and Huawei Y221-U22 Firmware Download

1. MTK USB Driver Google Drive
2. USB Driver VCOM Google Drive (install when flash won’t running)
3. CDC Driver Installer (Optional, install when the device can’t detect on PC)
4. Lenovo Driver (Optional, install when the device can’t detect on PC)
5. SP Flash Tool V5 Google Drive (Use SP Flash Tool V3, if the scatter file not load. Download SP Flash Tool 3)
6. USB Cable Data
7. Download stock ROM Huawei_Y221-U22_B109_MT6572_09092016.zip Firmware Flash File via Google Drive Mediafire
8. Password ZIP:

Read Also:  How to Flash Huawei Y360-U61 Firmware via SP Flash Tool

How to Flash Huawei Y221-U22 Firmware via SP Flash Tool

1. First of all, get all the tools and extract the .zip file.
2. Extract Huawei Y221-U22 flash file and you will see “MT6572_Android_scatter.txt“.
3. Install driver.
4. Install and run the SP Flash Tool application.
5. Click on Scatter-loading, then open the folder of Huawei Y221-U22 firmware, then click “MT6572_Android_scatter.txt“.
6. Wait until the Huawei Y221-U22 firmware loaded.
7. Uncheck on Preloader file when you not sure this ROM for Huawei Y221-U22. This will prevent from hard brick.
8. Make sure to select Download Only mode, then click the Download button.
9. Now Turn off your Huawei Y221-U22 and remove the battery (for non-removable battery, just need to turn off the device).
10. Press Volume Up and connect the device to PC (press Volume Down when flash not running, unplug the cable before reconnect and repeat the steps above).
11. Flash Huawei Y221-U22 will run automatically.
12. Wait until flashing finish with a green sign.
13. Unplug the cable and turn on your device.
14. First booting process will take 10-15 minutes, so just wait until entering the wizard menu.
15. Flash Huawei Y221-U22 firmware done.

Read Also: Flash Firmware Huawei Y520-U03 via Flashtool

NOTE:

• When the device can’t detect on PC, try to reinstall the driver (optional drivers).
• When flashing won’t running on “Download Only” mode, change with “Firmware Upgrade” mode, disconnect the device before reflashing.
• When Huawei Y221-U22 getting bootloop after flash, try to hard reset via recovery.

DO WITH YOUR OWN RISK