Advan S4z Plus Firmware
Unlock First, When flash failed Click Here
How to Flash Advan S4z Plus Firmware via QGDP Tool? To solve or fix the Advan S4z Plus android problem like bootloop or hang, forget the pattern, you can try this flash file as a solution. Because in this way will replace the file system Advan S4z Plus problem with fresh or new. Just remember before the flashing is backup important in the internal memory. Because after flash finished, the data will be wipe and lost.
Because this flash will wipe the entire contents of data stored in the internal memory. With this stock ROM firmware, Advan S4z Plus will feel as fresh as new.
With this tutorial How To Flash Firmware Advan S4z Plus via QGDP Tool can also solve other error problems, such as:
- Forgot Password
- Forget Pattern
- Advan S4z Plus Bootloop
- The touch screen is not sensitive
- Advan S4z Plus Stuck at Logo
- Blank screen
- Slow not responsive / Hang
- Advan S4z Plus only vibrate
- Due to a malware virus
- Unfortunately, messages has stopped
- Unfortunately, the app has stopped
- Often restarts itself
- And other errors
Read Also: How To Flash Advan S4M Firmware via SPD
Tools and Firmware Download
- QGDP Driver Setup
- SP Drivers v 1.5 (Optional driver – Install via Device Manager)
- QGDP Assembly Single Port V3
- Download firmware
ADVAN_S4Z_6.0.011.P1.1708021615.S4ZPLUS.RWTX_ADVAN_S4ZPLUS_OE.zip via Google Drive
————————– Firmware PAC via Research Download or SPD Tool ————————–
ADVAN_S4Z_6.0.011.P1.1708021615.S4ZPLUS.RWTX_ADVAN_S4ZPLUS_PAC.zip via Google Drive
Fix signal ADVAN_S4Z via Google Drive (Flash via PAC firmware only)
Read Also: Flash Advan S40
How To Flash Advan S4z Plus Firmware via QGDP Tool
- Install the drivers, if you already installed on your PC, skip this step.
- Download the firmware and extract.
- Now install and open the QGDP Tool.
- Make sure your phone is turned off.
- After the flash tool opened, enter this password “ase” or “369” and make sure to change the language to English.
- Click on the Config menu then Browse, find the Advan S4z Plus firmware where extracted.
- Now click Open then Apply.
- Wait until the CPB firmware loaded into flash tool QGDP.
- Click on the Start button.
- Now connect your phone with your PC (makes sure your phone is turned off and the battery is installed).
- When the drivers installed correctly, flashing will run automatically.
- If Windows Security asks to install the driver, please press Install this driver software anyway. In case, you need to remove the battery, put it again, and repeat step 10.
- Now flashing will run and wait until finish.
- Wait until 100%.
- Your phone Advan S4z Plus will reboot into the main menu.
- The first booting will take a minute, just wait.
- Flash Advan S4z Plus firmware via QGDP Tool is finished.
Read Also: Advan E1C NXT S7D Firmware