Firmware Samsung Galaxy S5 SM-G900P Sprint Flash File
Unlock First, When flash failed Click Here
With this Samsung Galaxy S5 SM-G900P Sprint flash file stock rom, the android that has problems like bootloop or forgot password will be easy to overcome. If it happens to your Samsung, you can try this Samsung Galaxy S5 SM-G900P Sprint flash mode to solve it. The need to remember is after flashing Samsung SM-G900P is done, the data stored in the internal memory will be erased. So always backup the data first before execution Samsung SM-G900P flash file. Because this way will replace the damaged system files or errors with a fresh firmware Samsung Galaxy S5 SM-G900P Sprint.
With this tutorial How To Flash Firmware Samsung Galaxy S5 SM-G900P Sprint via Odin can also solve other error problems, such as:
- Forgot Password
- Forget Pattern
- Samsung Galaxy S5 SM-G900P Sprint Bootloop
- Softbrick
- The touch screen is not sensitive
- low not responsive / Hang
- Virus malware
- Unfortunately, messages has stopped
- Unfortunately, the app has stopped
- Samsung Galaxy S5 SM-G900P Sprint often restarts itself
- And other errors
Tools for Flash Firmware Samsung Galaxy S5 SM-G900P Sprint Flash File
- Download Firmware File Samsung Galaxy S5 SM-G900P Sprint Stock Rom, Only for Samsung Galaxy S5 SM-G900P Sprint
- Odin3 V3.12.5.zip
- Samsung Driver
- USB Cable recommended using original Samsung USB Cable
- PC / Laptop OS Windows recommended Win 7
Read Also: How To Flash Firmware Samsung Galaxy S5 LTE DUOS SM-G900MD via Odin
How To Flash Firmware Samsung Galaxy S5 SM-G900P Sprint Flash File via Odin
- Model type is very important, make sure it has chosen correctly before download.
- After all the materials downloaded, move it to one folder.
- Extract the firmware Samsung Galaxy S5 SM-G900P Sprint flash file with .zip and you should see the .md5 file.
- Install the Samsung driver and make sure your device is detected by the computer.
- Open and run Odin.
- Turn off your Samsung Galaxy S5 SM-G900P Sprint.
- Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.
- If it is already in download mode, check on Odin application whether it has been detected or not.
- When the device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).
- Then click the “AP” and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than “AP“, please input it according to its original name “BL“, “CP“, “CSC“.
- And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).
- If everything is ready, click on “Start” to start flashing Samsung Galaxy S5 SM-G900P Sprint.
- A successful flash sign will display the message “PASS!” in the upper left of the Odin application.
- After the message appears, Samsung Galaxy S5 SM-G900P Sprint will reboot the system automatically and wait until entering the wizard menu.
- This boot process will take a little longer than usual, so just wait.
- Finally, flash firmware Samsung Galaxy S5 SM-G900P Sprint flash file via Odin is done.
Read Also: How To Flash Firmware Samsung Galaxy S5 SM-G900M via Odin
NOTE:
If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Galaxy S5 SM-G900P Sprint, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).
