Home»Samsung»How To Flash Firmware Samsung Galaxy S6 SM-G920TR via Odin

How To Flash Firmware Samsung Galaxy S6 SM-G920TR via Odin

Categories : Samsung

Unlock First, When flash failed Click Here

The easiest way to tackle the Samsung Galaxy S6 SM-G920TR bootloop is with this flash file. Because this flash file will replace the damaged system files cause bootloop with fresh new file. By using Samsung Galaxy S6 SM-G920TR Flash File stock rom will be like new. Keep in mind before flashing, the data stored in the internal memory will be wipe and lost. So please backup first important data to external memory or directly to PC for safe.

How To Flash Firmware Samsung Galaxy S6 SM G920TR via Odin

With this Tutorial “How To Flash Firmware Samsung Galaxy S6 SM-G920TR Flash File via Odin” you can also solve other error problems, such as:

  1. Samsung Galaxy S6 SM-G920TR Forgot Password
  2. Samsung Galaxy S6 SM-G920TR Forget Pattern
  3. Samsung Galaxy S6 SM-G920TR Bootloop
  4. Samsung Galaxy S6 SM-G920TR Softbrick
  5. Samsung Galaxy S6 SM-G920TR Touch screen is not sensitive
  6. Samsung Galaxy S6 SM-G920TR Slow not responsive / Hang
  7. Samsung Galaxy S6 SM-G920TR Virus malware
  8. Samsung Galaxy S6 SM-G920TR Unfortunately messages has stopped
  9. Samsung Galaxy S6 SM-G920TR Unfortunately the app has stopped
  10. Samsung Galaxy S6 SM-G920TR often restarts itself
  11. And other errors
Tools

Read Also:

How To Flash Firmware Samsung Galaxy S6 SM-G920TR via Odin
  • Use Filter Menu to select your Region (recommend use latest version).
  • Model type is very important, make sure it has chosen correctly before download.
  • After all materials downloaded, move it into one folder.
  • Extract the Samsung Galaxy S6 SM-G920TR flash file with .zip and you should see the .md5 file.
  • Install  Samsung driver and make sure your device is detected by computer.
  • Open and run Odin.
  • Turn off your Samsung Galaxy S6 SM-G920TR.
  • Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.

How To Flash Firmware Samsung Galaxy S6 SM-G920TR via Odin

  • If it is already in download mode, check on Odin application whether it has been detected or not.
  • When device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).

How To Flash Firmware Samsung Galaxy S6 SM-G920TR via Odin

  • Then click the “AP” and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than “AP“, please input it according to its original name “BL“, “CP“, “CSC“.

How To Flash Firmware Samsung Galaxy S6 SM-G920TR via Odin How To Flash Firmware Samsung Galaxy S6 SM-G920TR via Odin

  • And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).

How To Flash Firmware Samsung Galaxy S6 SM-G920TR via Odin

  • If everything is ready, click on “Start” to start flash Samsung Galaxy S6 SM-G920TR.
  • A successful flash sign will display the message “PASS!” in the upper left of the Odin application.

How To Flash Firmware Samsung Galaxy S6 SM-G920TR via Odin

  • After the message appears, Samsung Galaxy S6 SM-G920TR will reboot system automatically and wait until entering the wizard menu.
  • This boot process will take a little longer than usual, so just wait.
  • NOTE:

If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Galaxy S6 SM-G920TR, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).

Do With Your Own Risk

Related Posts