How To Flash Firmware Samsung Gear 2 Neo SM-R381 via Odin

Unlock First, When flash failed Click Here

Flash is a way to overcome various problems that occur on Samsung Gear 2 Neo SM-R381. Because by this flash file Samsung Gear 2 Neo SM-R381, which error like bootloop or malware virus can be overcome and return to normal without any constraints. Flashing is very useful to restore your troubled android. Because of how this flash will replace the firmware Samsung Gear 2 Neo SM-R381 problem with fresh stock rom without error.

With this tutorial How To Flash Firmware Samsung Gear 2 Neo SM-R381 via Odin you can also solve other error problems, such as:

1. Forgot Password
2. Forget Pattern
3. Samsung Gear 2 Neo SM-R381 Bootloop
4. Softbrick
5. The touch screen is not sensitive
6. Slow not responsive / Hang
7. Virus malware
8. Unfortunately, messages has stopped
9. Unfortunately, the app has stopped
10. often restarts itself
11. And other errors

Tools for Flash Firmware Samsung Gear 2 Neo SM-R381

1. Download Firmware File Samsung Gear 2 Neo SM-R381 Stock Rom, Only for Samsung Gear 2 Neo SM-R381
2. Odin3 V3.12.5.zip
3. Samsung Driver
4. USB Cable recommended using original Samsung USB Cable
5. PC / Laptop OS Windows recommended Win 7

Read Also: How To Flash Firmware Samsung Galaxy Gear SM-R380 via Odin

How To Flash Firmware Samsung Gear 2 Neo SM-R381 via Odin

1. Use Filter Menu to select your Region (recommend using the latest version).
2. Model type is very important, make sure it has chosen correctly before download.
3. After all, the materials downloaded, move it into one folder.
4. Extract the flash file with .zip and you should see the .md5 file.
5. Install the Samsung driver and make sure your device is detected by the computer.
6. Open and run Odin.
7. Turn off your Samsung Gear 2 Neo SM-R381.
8. Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.
   

   NOTE: use this method to enter download mode.
   1. Restart your Samsung Gear 2 Neo SM-R381, wait until Samsung screen disappear. When the logo are blur, press Power button 3-5 seconds and release. (when phone is on).
   2. Press Power button 3-5 seconds, holding until you enter recovery selection. Scroll down and select Download. (recommended)
   3. Use minimal adb with “adb reboot bootloader” or “adb reboot fastboot“.

9. If it is already in download mode, check on Odin application whether it has been detected or not.
10. When the device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).
11.  Then click the “AP” and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than “AP“, please input it according to its original name “BL“, “CP“, “CSC“.
    
12. And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).
    
13. If everything is ready, click on “Start” to start flash Samsung Gear 2 Neo SM-R381.
14. A successful flash sign will display the message “PASS!” in the upper left of the Odin application.
    
15. After the message appears, Samsung Gear 2 Neo SM-R381 will reboot the system automatically and wait until entering the wizard menu.
16. This boot process will take a little longer than usual, so just wait.

Read Also: How To Flash Firmware Samsung Galaxy Note 4 SM-N910F via Odin

• NOTE:

If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Gear 2 Neo SM-R381, go into recovery by above method, then choose wipe menu (cache, data, dalvik cache).

Do With Your Own Risk