How To Flash Samsung Galaxy J3 Pro SM-J3110 via Odin
Unlock First, When flash failed Click Here
Flash is one way to tackle android the bootloop. For example, Samsung Galaxy J3 Pro SM-J3110 that the problem occurs or malware virus, you can try this flash file stock rom as a solution to resolve it. Keep in mind for this flashing, data stored in the internal memory will be lost erased. So try to backup data before flashing done. Samsung Galaxy J3 Pro SM-J3110 firmware link in the middle post. When flash failed, you need to install Samsung Galaxy J3 Pro SM-J3110 driver or may you need unlock Samsung Galaxy J3 Pro SM-J3110 first before flashing. To unlock Samsung Galaxy J3 Pro SM-J3110 clocl link on above article and follow the step how to unlock the device.
With this Tutorial “How To Flash Samsung Galaxy J3 Pro SM-J3110 via Odin“ you can also solve other error problems, such as:
- Samsung Galaxy J3 Pro SM-J3110 Forgot Password
- Samsung Galaxy J3 Pro SM-J3110 Forget Pattern
- Samsung Galaxy J3 Pro SM-J3110 Bootloop
- Samsung Galaxy J3 Pro SM-J3110 Softbrick
- Samsung Galaxy J3 Pro SM-J3110 Touch screen is not sensitive
- Samsung Galaxy J3 Pro SM-J3110 Slow not responsive / Hang
- Samsung Galaxy J3 Pro SM-J3110 Virus malware
- Samsung Galaxy J3 Pro SM-J3110 Unfortunately messages has stopped
- Samsung Galaxy J3 Pro SM-J3110 Unfortunately the app has stopped
- Samsung Galaxy J3 Pro SM-J3110 often restarts itself
- And other errors
Tools
- Download Firmware Samsung Galaxy J3 Pro SM-J3110 Flash File Stock Rom. Only for Samsung Galaxy J3 Pro SM-J3110
- Odin3 V3.12.5.zip
- Samsung Driver
- USB Cable, recommended to use original Samsung USB Cable
- PC / Laptop OS Windows, recommended Win 7
Read Also:
- How To Flash Samsung Galaxy On7 Prime SM-G611L via Odin
- How To Flash Samsung Galaxy C5 Pro SM-C5018 via Odin
How To Flash Samsung Galaxy J3 Pro SM-J3110 via Odin
- Use Filter Menu to select your Region (recommend use latest version).
- Model type is very important, make sure it has chosen correctly before download.
- After all materials downloaded, move it into one folder.
- Extract the Samsung Galaxy J3 Pro SM-J3110 flash file with .zip and you should see the .md5 file.
- Install Samsung driver and make sure your device is detected by computer.
- Open and run Odin.
- Turn off your Samsung Galaxy J3 Pro SM-J3110.
- Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.
- If it is already in download mode, check on Odin application whether it has been detected or not.
- When device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).
- Then click the “AP” and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than “AP“, please input it according to its original name “BL“, “CP“, “CSC“.
- And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).
- If everything is ready, click on “Start” to start flash Samsung Galaxy J3 Pro SM-J3110.
- A successful flash sign will display the message “PASS!” in the upper left of the Odin application.
- After the message appears, Samsung Galaxy J3 Pro SM-J3110 will reboot system automatically and wait until entering the wizard menu.
- This boot process will take a little longer than usual, so just wait.
- NOTE:
If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Galaxy J3 Pro SM-J3110, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).
Do With Your Own Risk