How To Flash Samsung Galaxy S8 Plus SM-G955W via Odin
Unlock First, When flash failed Click Here
Bootloop, hang, or error due to forgotten passwords can happen on your Samsung Galaxy S8 Plus SM-G955W. Lots of ways to overcome the problem, one of them is with Samsung Galaxy S8 Plus SM-G955W flash file. With this flashing method, the troubled Samsung Galaxy S8 Plus SM-G955W will be back to normal, because it has been done flashing or replaced with a fresh firmware without error. Keep in mind is the internal memory on android Samsung Galaxy S8 Plus SM-G955W will be wipe, so do backup data before the flash starts.
.
With this Tutorial “How To Flash Samsung Galaxy S8 Plus SM-G955W via Odin“ you can also solve other error problems, such as:
- Samsung Galaxy S8 Plus SM-G955W Forgot Password
- Samsung Galaxy S8 Plus SM-G955W Forget Pattern
- Samsung Galaxy S8 Plus SM-G955W Bootloop
- Samsung Galaxy S8 Plus SM-G955W Softbrick
- Samsung Galaxy S8 Plus SM-G955W Touch screen is not sensitive
- Samsung Galaxy S8 Plus SM-G955W Slow not responsive / Hang
- Samsung Galaxy S8 Plus SM-G955W Virus malware
- Samsung Galaxy S8 Plus SM-G955W Unfortunately messages has stopped
- Samsung Galaxy S8 Plus SM-G955W Unfortunately the app has stopped
- Samsung Galaxy S8 Plus SM-G955W often restarts itself
- And other errors
Tools
- Download Firmware Samsung Galaxy S8 Plus SM-G955W Flash File Stock Rom. Only for Samsung Galaxy S8 Plus SM-G955W
- Odin3 V3.12.5.zip
- Samsung Driver
- USB Cable, recommended to use original Samsung USB Cable
- PC / Laptop OS Windows, recommended Win 7
Read Also:
How To Flash Samsung Galaxy S8 Plus SM-G955W via Odin
- Use Filter Menu to select your Region (recommend use latest version).
- Model type is very important, make sure it has chosen correctly before download.
- After all materials downloaded, move it into one folder.
- Extract the Samsung Galaxy S8 Plus SM-G955W flash file with .zip and you should see the .md5 file.
- Install Samsung driver and make sure your device is detected by computer.
- Open and run Odin.
- Turn off your Samsung Galaxy S8 Plus SM-G955W.
- Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.
- If it is already in download mode, check on Odin application whether it has been detected or not.
- When device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).
- Then click the “AP” and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than “AP“, please input it according to its original name “BL“, “CP“, “CSC“.
- And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).
- If everything is ready, click on “Start” to start flash Samsung Galaxy S8 Plus SM-G955W.
- A successful flash sign will display the message “PASS!” in the upper left of the Odin application.
- After the message appears, Samsung Galaxy S8 Plus SM-G955W will reboot system automatically and wait until entering the wizard menu.
- This boot process will take a little longer than usual, so just wait.
- NOTE:
If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Galaxy S8 Plus SM-G955W, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).
Do With Your Own Risk
