Huawei P8 Young ALE UL00 Firmware

Unlock First, When flash failed Click Here

How to Flash Huawei P8 Young ALE UL00 Firmware via Recovery Without PC? This flash file stock rom tutorial is used to solve various problems that occur on Huawei P8 ALE UL00. As an example, if there is bootloop or hang because of the virus, you can try this flashing way to overcome the bootloop and other problems on Huawei P8 Young ALE UL00 software. The important thing to remember for this tutorial is to backup data stored in internal memory. Because with this flash will wipe the stored data and replaced with the new firmware file. Download Huawei P8 ALE UL00 firmware on the middle post. Don’t forget to install the Huawei P8 UL00 driver first before flash. When flashing won’t start, you need to unlock the device. Visit the link above this article and follow the step on how to unlock Huawei ALE UL00.

With this Tutorial How to Flash Huawei P8 Young ALE UL00 Firmware via Recovery Without PC, you can also solve other error problems, such as:

• Huawei P8 Young ALE UL00 Forgot Password
• Huawei P8 UL00 Stuck on Logo
• Forget Pattern
• Huawei P8 ALE UL00 Bootloop
• Soft Brick
• Huawei ALE UL00 Blank Screen
• The touch screen is not sensitive
• Slow not responsive / Hang
• Huawei UL00 hang on Logo
• Virus malware
• Unfortunately, the app has stopped
• Huawei P8 Young ALE UL00 often restarts itself
• And other errors

Huawei P8 UL00 Firmware Download

1. Make sure your battery more than 80%.
2. Backup data
3. Download stock ROM Huawei P8 Young ALE UL00 V100R001C00B131 Dload.zip firmware flash file via Google Drive Mediafire
4. Password ZIP:

Read Also:  Huawei Ascend P7-L10 Firmware via Recovery Dload Folder

How to Flash Huawei P8 Young ALE UL00 Firmware via Recovery Without PC

1. First of all, download Huawei P8 ALE UL00 firmware, make sure your device is same with this firmware.
2. Extract Huawei P8 Young ALE UL00 flash file and you will see a folder with name dload.
3. Open the folder and make sure you will see the file with the name UPDATE.APP.
4. If all is done, move dload folder to microSD, the folder should be outside another folder. For non-memory (only internal), just move the folder to internal memory also outside another folder.
5. Now, turn off your Huawei P8 Young ALE UL00.
6. Turn on your device to enter system update mode:
   Hold Volume Up and Volume Down + Power Button.
   NOTE: for several devices that are not working. You should find out how to enter the system update mode.
7. Hold the button until entering the system update.
8. Flash Huawei P8 Young ALE UL00 will run automatically.
9. Flashing maybe will take 5-15 minutes.
10. Wait until flash Huawei P8 Young ALE UL00 stock ROM finish.
11. When a flash is done, Huawei P8 Young ALE UL00 will reboot automatically to the system menu.
12. First time booting will take a minute due to install the new file system. Just wait until entering wizard menus like input language, times set, and others.
13. Finally, flash firmware Huawei P8 Young ALE UL00 done.

Read Also: Huawei U1290 Firmware via Recovery

DO WITH YOUR OWN RISK