Huawei Y6 SCL-L21 Firmware
Unlock First, When flash failed Click Here
To solve or fix the Huawei Y6 SCL-L21 android problem like bootloop or hang, forget the pattern, you can try this Huawei Y6 SCL-L21 flash file as a solution. Because in this way will replace the file system Huawei Y6 SCL-L21 firmware problem with fresh or new. Just remember before flashing is backup important in the internal memory. Because after flash finished, the data will be wipe and lost.
Because this flash will wipe the entire contents of data stored in the internal memory. With this stock ROM firmware Huawei Y6 SCL-L21 will feel as fresh as new.
With this tutorial How to flash Huawei Y6 SCL-L21 Firmware via QFIL Tool, you can also solve other error problems, such as:
- Huawei Y6 SCL-L21 Forgot Password
- Huawei Y6 Stuck on Logo
- Forget Pattern
- Huawei Y6 SCL-L21 Bootloop
- Soft Brick
- Huawei Y6 Blank Screen
- The touch screen is not sensitive
- Slow not responsive / Hang
- Virus malware
- Unfortunately, the app has stopped
- Huawei Y6 SCL-L21 often restarts itself
- And other errors
Tools and Huawei Y6 SCL-L21
- Qualcomm Driver for Huawei Y6 SCL-L21
- QFIL Tool
- Firmware Huawei Y6 SCL-L21 C900B050_Board_Software_05021TVT_QPST.zip via Google Drive
Read Also: Huawei Y6 2019 MRD-LX1F Firmware
How to Flash Huawei Y6 SCL-L21 Firmware via QFIL Tool
- First of all, get all tools and extract them into one folder.
- Install the Qualcomm Driver. If the installation failed, you need to install it manually from the device manager.
- Open the QFIL Tool.
- Make sure the Qualcomm Driver for QFIL is installed correctly and detected on device manager (COM6 port is my device, may be different on your PC).
- If the installation failed, try this method:
Turn off your device, hold Volume Up + Volume Bottom and plug your Huawei Y6 SCL-L21 to PC, wait till the driver installed and device detected. This will appear on QFIL COM port.
- Extract the Huawei Y6 SCL-L21 flash file and make sure you see a file with a .mbn format, similarly as for files like prog_emmc_xxx.mbn, also the important files are rawprogram0.xml or rawprogram2.xml and patch0.xml. That 3 files are very important (prog_emmc_xxx.mbn, rawprogram0.xml, and patch0.xml), and sometimes the files are not included on the ROM flash file pack, you need to find manually via google or XDA forum.
- Click menu Flat build then click menu Browse, find the Huawei Y6 SCL-L21 flash file where you extract.
- Find the files prog_emmc_xxx.mbn, then open the .mbn file.
- Click menu Load XML, you will see the file like rawprogram0 with XML format, click open and next click patch0 with the same format and last click open again.
- After all ready, click the Download button and wait for the flash Huawei Y6 SCL-L21 Firmware finished.
- This process usually taking 5-10 minutes.
- Flash finish will show messages “Download Succeed” and “Finish Download” on tab menu Status.
- Unplug the cable and turn on your Huawei Y6 SCL-L21.
- First booting after flash will take 5-10 minutes. So, just wait until entering the wizard menu.
- Finally, flash Huawei Y6 SCL-L21 firmware Done.
Read Also: Firmware Huawei Y6 2019 MRD-LX3
With this tutorial How to Flash Huawei Y6 SCL-L21 via QFIL, you will get a fresh ROM without errors.
