Lenovo Legion Y90 L71061 Firmware

Categories : Lenovo

Unlock First, When flash failed Click Here

How to Flash Lenovo Legion Y90 L71061 Firmware via QPST (Flash File)? Bootloop, hang, or error due to forgotten passwords can happen on your Lenovo. Lots of ways to overcome the problem, one of them is with the Lenovo Y90 L71061 flash file. With this flashing method, the troubled Lenovo will be back to normal, because it has been done flashing or replaced with fresh firmware without error. Keep in mind is the internal memory on android will wipe, so do backup data before the flash starts.

How to Flash Lenovo Legion Y90 L71061 Firmware via QPST (Flash File)

With this tutorial How To Flash Firmware Lenovo Legion Y90 L71061 via QPST can also solve other error problems, such as:

  • Forgot Password
  • Forget Pattern
  • Lenovo Legion Y90 L71061 Bootloop
  • Softbrick
  • The touch screen is not sensitive
  • Stuck at Logo
  • Blank screen
  • Slow not responsive / Hang
  • Samsung only vibrate
  • Due to a malware virus
  • Unfortunately, messages has stopped
  • Unfortunately, the app has stopped
  • Often restarts itself
  • And other errors

Read Also: How to Flash Samsung Galaxy A70 SM-A705GM Firmware via Odin

Tools and Firmware Download

  1. QPST_2.7.496
  2. Qualcomm HS-USB QDLoader 9008 Driver
  3. USB Cable recommended using the original Samsung USB Cable

Read Also: Samsung Galaxy A70 SM-A705FN Firmware

How to Flash Lenovo Legion Y90 L71061 via QPST

  1. Download the firmware and Qualcomm driver.
  2. Install driver.
  3. Connect device to your PC.
  4. Install QPST and run the program QPST config.exe on the folder C:\Program Files\Qualcomm\QPST\bin\.
  5. Click the Ports tab to make sure your device is detected.
    Config Port
  6. On the Server Clients then Software Download.How to Flash Lenovo Legion Y90 L71061
  7. Click browse on the Phone image and find the firmware with format .hex (NOT BOOT_LOADER.hex).
  8. On Boot image, find the file named BOOT_LOADER.hex.
  9. Click Start when all is ready to start flashing.
  10. After flashing is completed you will see the Green Bar.Flash via QPST is Done
  11. Device will reboot automatically.
  12. Flash done.

Read Also: Download Samsung Galaxy A70 SM-A705F Flash File


– Sometimes after flash and reboot, the device will bootloop and you need to do hard reset manually via Recovery.

Do With Your Own Risk