Micromax Bolt Prime Q306 Firmware

Unlock First, When flash failed Click Here

How to Flash Micromax Bolt Prime Q306 Firmware via SP Flash Tool (Scatter File)? Bootloop, hang, or error due to forgotten passwords can happen on your Micromax. Lots of ways to overcome the problem, one of them is with the Micromax flash file. You can download this Micromax Q306 firmware via google drive, this firmware is the stock ROM of Micromax.

With this flashing method, the troubled Micromax will be back to normal, because it has been done flashing or replaced with fresh firmware without error. Keep in mind is the internal memory on android Micromax will wipe, so do backup data before the flash starts.

With this Tutorial How to Flash Firmware Micromax Bolt Prime Q306 via SP Flash Tool, you can also solve other error problems, such as:

• Forgot Password
• Micromax Bolt Prime Stuck on Logo
• Forget Pattern
• Bootloop
• Soft Brick
• Blank Screen
• The touch screen is not sensitive
• Slow not responsive / Hang
• Virus malware
• Unfortunately, the app has stopped
• Micromax often restarts itself
• And other errors

Read Also:  How to Flash Micromax IN 1B Firmware via SP Flash Tool

Tools and Firmware Download

1. MTK USB Driver
2. USB Driver VCOM (install when flash won’t running)
3. CDC Driver Installer (Optional, install when the device can’t detect on PC)
4. Lenovo Driver (Optional, install when the device can’t detect on PC)
5. SP Flash Tool V5 Google Drive (Use SP Flash Tool V3, if the scatter file not load. Download SP Flash Tool 3)
6. USB Cable Data
7. Download firmware Micromax_Q306_MT6580_RU_SW_V1.0_HW_V1.0_26102018.zip stock ROM via Google Drive – Google Drive

Read Also:  Flash Micromax A35

How to Flash Micromax Bolt Prime Q306 Firmware via SP Flash Tool

1. First of all, get all the tools and extract the .zip file.
2. Extract the Micromax Q306 flash file and you will see “MTxxxx_Android_scatter.txt“.
3. Install USB driver.
4. Install and run the SP Flash Tool application.
5. Click on Scatter-loading, then open the folder of Micromax Bolt Prime firmware, then click “MTxxxx_Android_scatter.txt“.
6. Wait until the firmware loaded.
7. Uncheck on the Preloader file when you not sure of this ROM for Micromax Bolt Prime Q306. This will prevent hard brick, this is optional.
8. Make sure to select Download Only mode, then click the Download button.
9. Now Turn off your device and remove the battery (for non-removable battery, just need to turn off the device).
10. Press Volume Up and connect the device to PC (press Volume Down when flash not running, unplug the cable before reconnect, and repeat the steps above).
11. Flash will run automatically.
12. Wait until flashing finishes with a green sign.
13. Unplug the cable and turn on your device.
14. The first booting process will take 10-15 minutes, so just wait until entering the wizard menu.
15. Flash Micromax Q306 firmware is done.

Read Also: Firmware Evercoss A54B

NOTE:

• When the device can’t detect on PC, try to reinstall the driver (optional drivers).
• When flashing won’t running on “Download Only” mode, change with “Firmware Upgrade” mode, disconnect the device before reflashing.
• When getting bootloop after flash, try to hard reset via recovery.

DO WITH YOUR OWN RISK