Samsung Galaxy J1 Ace Neo SM-J111F Firmware and Flash via Odin

Unlock First, When flash failed Click Here

This flash file stock rom tutorial is used to solve various problems that occur on Samsung Galaxy J1 Ace Neo SM-J111F. As an example if there is bootloop or hang because of the virus, you can try this flashing way to overcome the bootloop and other problems on Samsung Galaxy J1 Ace Neo SM-J111F software. The important thing to remember for this tutorial is to backup data stored in internal memory. Because with this flash will wipe the stored data and replaced with new Samsung Galaxy J1 Ace Neo SM-J111F firmware file. Make sure the Samsung Galaxy J1 Ace Neo SM-J111F driver is installed correctly.

With this Tutorial “Samsung Galaxy J1 Ace Neo SM-J111F Firmware and Flash via Odin“ you can also solve other error problems, such as:

1. Samsung Galaxy J1 Ace Neo SM-J111F Forgot Password
2. Samsung Galaxy J1 Ace Neo SM-J111F Forget Pattern
3. Samsung Galaxy J1 Ace Neo SM-J111F Bootloop
4. Samsung Galaxy J1 Ace Neo SM-J111F Softbrick
5. Samsung Galaxy J1 Ace Neo SM-J111F Touch screen is not sensitive
6. Samsung Galaxy J1 Ace Neo SM-J111F Slow not responsive / Hang
7. Samsung Galaxy J1 Ace Neo SM-J111F Virus malware
8. Samsung Galaxy J1 Ace Neo SM-J111F Unfortunately messages has stopped
9. Samsung Galaxy J1 Ace Neo SM-J111F Unfortunately the app has stopped
10. Samsung Galaxy J1 Ace Neo SM-J111F often restarts itself
11. And other errors

Tools

• Download Firmware Samsung Galaxy J1 Ace Neo SM-J111F Flash File Stock Rom, Only for Samsung Galaxy J1 Ace Neo SM-J111F
• Odin3 V3.12.5.zip
• Samsung Driver
• USB Cable, recommended to use original Samsung USB Cable
• PC / Laptop OS Windows, recommended Win 7

Read Also:

• Samsung Galaxy J2 PRO SM-J210F Firmware and Flash via Odin
• Samsung Galaxy A3 SM-A320F Firmware and Flash via Odin

Samsung Galaxy J1 Ace Neo SM-J111F Firmware and Flash via Odin

• Use Filter Menu to select your Region (recommend use latest version).
• Model type is very important, make sure it has chosen correctly before download.
• After all materials downloaded, move it into one folder.
• Extract the Samsung Galaxy J1 Ace Neo SM-J111F firmware flash file with .zip and you should see the .md5 file.
• Install  Samsung driver and make sure your device is detected by computer.
• Open and run Odin.
• Turn off your Samsung Galaxy J1 Ace Neo SM-J111F.
• Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.

• If it is already in download mode, check on Odin application whether it has been detected or not.
• When device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).

• Then click the “AP” and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than “AP“, please input it according to its original name “BL“, “CP“, “CSC“.

• And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).

• If everything is ready, click on “Start” to start flash Samsung Galaxy J1 Ace Neo SM-J111F.
• A successful flash sign will display the message “PASS!” in the upper left of the Odin application.

• After the message appears, Samsung Galaxy J1 Ace Neo SM-J111F will reboot system automatically and wait until entering the wizard menu.
• This boot process will take a little longer than usual, so just wait.

• NOTE:

If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Galaxy J1 Ace Neo SM-J111F, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).

Do With Your Own Risk