Samsung Galaxy J1 SM-J120G Firmware Download and Flash via Odin

Categories : Samsung

Unlock First, When flash failed Click Here

Bootloop, hang, or error due to forgotten passwords can happen on your Samsung Galaxy J1 SM-J120G. Lots of ways to overcome the problem, one of them is with Samsung Galaxy J1 SM-J120G flash file. With this flashing method, the troubled Samsung Galaxy J1 SM-J120G will be back to normal, because it has been done flashing or replaced with a fresh Samsung Galaxy J1 SM-J120G firmware without error. Keep in mind is the internal memory on android Samsung Galaxy J1 SM-J120G will be wipe, so do backup data before the flash starts.

Samsung Galaxy J1 SM J120G Firmware Download and Flash via Odin

With this Tutorial Samsung Galaxy J1 SM-J120G Firmware and Flash via Odin you can also solve other error problems, such as:

  1. Samsung Galaxy J1 SM-J120G Forgot Password
  2. Samsung Galaxy J1 SM-J120G Forget Pattern
  3. Samsung Galaxy J1 SM-J120G Bootloop
  4. Samsung Galaxy J1 SM-J120G Stuck on Logo
  5. Samsung Galaxy J1 SM-J120G Softbrick
  6. Samsung Galaxy J1 SM-J120G Touch screen is not sensitive
  7. Samsung Galaxy J1 SM-J120G Slow not responsive / Hang
  8. Samsung Galaxy J1 SM-J120G Virus malware
  9. Samsung Galaxy J1 SM-J120G Unfortunately messages has stopped
  10. Samsung Galaxy J1 SM-J120G Unfortunately the app has stopped
  11. Samsung Galaxy J1 SM-J120G often restarts itself
  12. And other errors

Tools

Read Also:

Samsung Galaxy J1 SM-J120G Firmware and Flash via Odin

  • Use Filter Menu to select your Region (recommend use latest version).
  • Model type is very important, make sure it has chosen correctly before download.
  • After all materials downloaded, move it into one folder.
  • Extract the Samsung Galaxy J1 SM-J120G firmware flash file with .zip and you should see the .md5 file.
  • Install Samsung driver and make sure your device is detected by computer.
  • Open and run Odin.
  • Turn off your Samsung Galaxy J1 SM-J120G.
  • Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.

Samsung Galaxy J1 SM-J120G Firmware and Flash via Odin

  • If it is already in download mode, check on Odin application whether it has been detected or not.
  • When device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).

Samsung Galaxy J1 SM-J120G Flash File via Odin

  • Then click the AP and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than AP, please input it according to its original name BL, CP, CSC (optional files).

Samsung Galaxy J1 SM-J120G Firmware and Flash via Odin Samsung Galaxy J1 SM-J120G Firmware and Flash via Odin

  • And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).

Samsung Galaxy J1 SM-J120G Firmware and Flash via Odin

  • If everything is ready, click on “Start” to start flash Samsung Galaxy J1 SM-J120G.
  • A successful flash sign will display the message “PASS!” in the upper left of the Odin application.

Samsung Galaxy J1 SM-J120G Firmware and Flash via Odin

  • After the message appears, Samsung Galaxy J1 SM-J120G will reboot system automatically and wait until enter the wizard menu.
  • Booting process will take 5-15 minutes even more, so just wait.
  • Finally, flash Samsung Galaxy J1 SM-J120G via Odin flashtool is done.

NOTE:

If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Galaxy J1 SM-J120G, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).

Do With Your Own Risk

Popular Search:
  • odin j120g