Samsung Galaxy J3 SM-J320R4 Firmware and Flash via Odin

Unlock First, When flash failed Click Here

To solve or fix the Samsung Galaxy J3 SM-J320R4 android problem like bootloop or hang, forget the pattern, you can try this flash file as a solution. Because in this way will replace the file system Samsung Galaxy J3 SM-J320R4 problem with fresh or new. Just remember before flashing is backup important in the internal memory. Because after flash finished, the data will be wipe and lost. Make sure your Samsung is same with this Samsung Galaxy J3 SM-J320R4 firmware and don’t forget to install the Samsung Galaxy J3 SM-J320R4 driver before connect to Odin.

With this Tutorial “Samsung Galaxy J3 SM-J320R4 Firmware and Flash via Odin“ you can also solve other error problems, such as:

1. Samsung Galaxy J3 SM-J320R4 Forgot Password
2. Samsung Galaxy J3 SM-J320R4 Forget Pattern
3. Samsung Galaxy J3 SM-J320R4 Bootloop
4. Samsung Galaxy J3 SM-J320R4 Softbrick
5. Samsung Galaxy J3 SM-J320R4 Touch screen is not sensitive
6. Samsung Galaxy J3 SM-J320R4 Slow not responsive / Hang
7. Samsung Galaxy J3 SM-J320R4 Virus malware
8. Samsung Galaxy J3 SM-J320R4 Unfortunately messages has stopped
9. Samsung Galaxy J3 SM-J320R4 Unfortunately the app has stopped
10. Samsung Galaxy J3 SM-J320R4 often restarts itself
11. And other errors

Tools

• Download Firmware Samsung Galaxy J3 SM-J320R4 Flash File Stock Rom, Only for Samsung Galaxy J3 SM-J320R4
• Odin3 V3.12.5.zip
• Samsung Driver
• USB Cable, recommended to use original Samsung USB Cable
• PC / Laptop OS Windows, recommended Win 7

Read Also:

• Samsung Galaxy J7 SM-J700M Firmware and Flash via Odin
• Samsung Galaxy J3 SM-J320N0 Firmware and Flash via Odin

Samsung Galaxy J3 SM-J320R4 Firmware and Flash via Odin

• Use Filter Menu to select your Region (recommend use latest version).
• Model type is very important, make sure it has chosen correctly before download.
• After all materials downloaded, move it into one folder.
• Extract the Samsung Galaxy J3 SM-J320R4 firmware flash file with .zip and you should see the .md5 file.
• Install  Samsung driver and make sure your device is detected by computer.
• Open and run Odin.
• Turn off your Samsung Galaxy J3 SM-J320R4.
• Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.

• If it is already in download mode, check on Odin application whether it has been detected or not.
• When device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).

• Then click the “AP” and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than “AP“, please input it according to its original name “BL“, “CP“, “CSC“.

• And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).

• If everything is ready, click on “Start” to start flash Samsung Galaxy J3 SM-J320R4.
• A successful flash sign will display the message “PASS!” in the upper left of the Odin application.

• After the message appears, Samsung Galaxy J3 SM-J320R4 will reboot system automatically and wait until entering the wizard menu.
• This boot process will take a little longer than usual, so just wait.

• NOTE:

If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Galaxy J3 SM-J320R4, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).

Do With Your Own Risk