Samsung Galaxy J7 SM-J700T Firmware and Flash via Odin

Flash is one way to tackle android the bootloop. For example, Samsung Galaxy J7 SM-J700T that the problem occurs or malware virus, you can try this flash file stock rom as a solution to resolve it. Keep in mind for this flashing, data stored in the internal memory will be lost erased. So try to backup data before flashing done. You can download the Samsung Galaxy J7 SM-J700T firmware on link in the middle post. And make sure the Samsung Galaxy J7 SM-J700T driver is installed correctly.

Samsung Galaxy J7 SM J700T Firmware and Flash via Odin

With this Tutorial Samsung Galaxy J7 SM-J700T Firmware and Flash via Odin you can also solve other error problems, such as:

  1. Samsung Galaxy J7 SM-J700T Forgot Password
  2. Samsung Galaxy J7 SM-J700T Forget Pattern
  3. Samsung Galaxy J7 SM-J700T Bootloop
  4. Samsung Galaxy J7 SM-J700T Softbrick
  5. Samsung Galaxy J7 SM-J700T Touch screen is not sensitive
  6. Samsung Galaxy J7 SM-J700T Slow not responsive / Hang
  7. Samsung Galaxy J7 SM-J700T Virus malware
  8. Samsung Galaxy J7 SM-J700T Unfortunately messages has stopped
  9. Samsung Galaxy J7 SM-J700T Unfortunately the app has stopped
  10. Samsung Galaxy J7 SM-J700T often restarts itself
  11. And other errors

Tools

Read Also:

Samsung Galaxy J7 SM-J700T Firmware and Flash via Odin

  • Use Filter Menu to select your Region (recommend use latest version).
  • Model type is very important, make sure it has chosen correctly before download.
  • After all materials downloaded, move it into one folder.
  • Extract the Samsung Galaxy J7 SM-J700T firmware flash file with .zip and you should see the .md5 file.
  • Install  Samsung driver and make sure your device is detected by computer.
  • Open and run Odin.
  • Turn off your Samsung Galaxy J7 SM-J700T.
  • Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.

Samsung Galaxy J7 SM-J700T Firmware and Flash via Odin

  • If it is already in download mode, check on Odin application whether it has been detected or not.
  • When device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).

Samsung Galaxy J7 SM-J700T Flash File via Odin

  • Then click the “AP” and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than “AP“, please input it according to its original name “BL“, “CP“, “CSC“.

Samsung Galaxy J7 SM-J700T Firmware and Flash via Odin Samsung Galaxy J7 SM-J700T Firmware and Flash via Odin

  • And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).

Samsung Galaxy J7 SM-J700T Firmware and Flash via Odin

  • If everything is ready, click on “Start” to start flash Samsung Galaxy J7 SM-J700T.
  • A successful flash sign will display the message “PASS!” in the upper left of the Odin application.

Samsung Galaxy J7 SM-J700T Firmware and Flash via Odin

  • After the message appears, Samsung Galaxy J7 SM-J700T will reboot system automatically and wait until entering the wizard menu.
  • This boot process will take a little longer than usual, so just wait.
  • NOTE:

If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Galaxy J7 SM-J700T, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).

Do With Your Own Risk