Samsung Galaxy S6 Edge SM-G925P Flash File via Odin

Unlock First, When flash failed Click Here

Flash is a way to overcome various problems that occur on Samsung Galaxy S6 Edge SM-G925P. Because by this flash file Samsung Galaxy S6 Edge SM-G925P, which error like bootloop or malware virus can be overcome and return to normal without any constraints. Flashing is very useful to restore your troubled android. Because of how this flash will replace the Samsung Galaxy S6 Edge SM-G925P firmware problem with fresh stock rom without error.

With this Tutorial “How To Flash Firmware Samsung Galaxy S6 Edge SM-G925P Flash File via Odin” you can also solve other error problems, such as:

1. Samsung Galaxy S6 Edge SM-G925P Forgot Password
2. Samsung Galaxy S6 Edge SM-G925P Forget Pattern
3. Samsung Galaxy S6 Edge SM-G925P Bootloop
4. Samsung Galaxy S6 Edge SM-G925P Softbrick
5. Samsung Galaxy S6 Edge SM-G925P Touch screen is not sensitive
6. Samsung Galaxy S6 Edge SM-G925P Slow not responsive / Hang
7. Samsung Galaxy S6 Edge SM-G925P Virus malware
8. Samsung Galaxy S6 Edge SM-G925P Unfortunately messages has stopped
9. Samsung Galaxy S6 Edge SM-G925P Unfortunately the app has stopped
10. Samsung Galaxy S6 Edge SM-G925P often restarts itself
11. And other errors

• Download Firmware Samsung Galaxy S6 Edge SM-G925P Flash File Stock Rom, Only for Samsung Galaxy S6 Edge SM-G925P
• Odin3 V3.12.5.zip
• Samsung Driver
• USB Cable, recommended to use original Samsung USB Cable
• PC / Laptop OS Windows, recommended Win 7

Read Also:

• Samsung Galaxy S6 Edge SM-G925K Flash File via Odin
• Samsung Galaxy S6 Edge SM-G925S Flash File via Odin

• Use Filter Menu to select your Region (recommend use latest version).
• Model type is very important, make sure it has chosen correctly before download.
• After all materials downloaded, move it into one folder.
• Extract the Samsung Galaxy S6 Edge SM-G925P flash file with .zip and you should see the .md5 file.
• Install  Samsung driver and make sure your device is detected by computer.
• Open and run Odin.
• Turn off your Samsung Galaxy S6 Edge SM-G925P.
• Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.

• If it is already in download mode, check on Odin application whether it has been detected or not.
• When device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).

• Then click the “AP” and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than “AP“, please input it according to its original name “BL“, “CP“, “CSC“.

• And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).

• If everything is ready, click on “Start” to start flash Samsung Galaxy S6 Edge SM-G925P.
• A successful flash sign will display the message “PASS!” in the upper left of the Odin application.

• After the message appears, Samsung Galaxy S6 Edge SM-G925P will reboot system automatically and wait until entering the wizard menu.
• This boot process will take a little longer than usual, so just wait.

• NOTE:

If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Galaxy S6 Edge SM-G925P, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).

Do With Your Own Risk