How to Flash Samsung Galaxy Xcover 2 GT-S7710 Firmware via Odin (Flash File)? There are so many ways to solve the problem on Samsung, such as bootloop or slow down after installing the application. With this flash file, everything will be solved easily. The most important thing to do is to backup data stored in memory Samsung GT-S7710 and replaced it with fresh stock ROM firmware. Because this flashing process will wipe all the data stored in it. You need to backup data before flash started.
With this tutorial How To Flash Firmware Samsung Galaxy Xcover 2 GT-S7710L via Odin can also solve other error problems, such as:
How To Flash Samsung Galaxy Xcover 2 GT-S7710L Firmware via Odin
Model type is very important, make sure it has been chosen correctly before download.
After all the materials are downloaded, move them to one folder.
Extract the Samsung GT-S7710L flash file with .zip and you should see the .md5 file.
Install the Samsung driver and make sure your computer detects the device.
Open and run Odin.
Turn off your device.
Then go to Download Mode, press and hold down “Volume Down + Home + Power” together, you will see a “Warning” message, then you should quickly press Volume Up.
If it is already in download mode, check on the Odin application whether it has been detected or not.
When connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).
Then click the “AP” and locate the .md5 file earlier in the extracted folder. If there is more than “AP” files, please input it according to its original name “BL“, “CP“, “CSC“.
And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).
If everything is ready, click on “Start” to start flashing.
A successful flash sign will display the message “PASS!” in the upper left of the Odin application.
After the message appears, the device will reboot the system automatically and wait until entering the wizard menu.
This boot process will take a little longer than usual, so just wait.
Flash Samsung Galaxy Xcover 2 GT-S7710L finally is done.
If booting more than 10 minutes or get bootloop, you should wipe reset manual through recovery. Turn off your Samsung, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).
