ZTE V9180 Firmware
Unlock First, When flash failed Click Here
How to Flash ZTE V9180 Firmware via QFIL (Flash File)? The easiest way to tackle the ZTE bootloop is with this flash file. Because this flash file will replace the damaged system files cause bootloop with the fresh new file. By using ZTE V9180 firmware Stock ROM will be like new.
Keep in mind before flashing, the data stored in the internal memory will be wiped and lost. So please backup the first important data to external memory or directly to the PC for safety.
With this tutorial How to flash ZTE V9180 Firmware via QFIL Tool, you can also solve other error problems, such as:
- Forgot Password
- Stuck on Logo
- Forget Pattern
- ZTE V9180 Bootloop
- Soft Brick
- Blank Screen
- The touch screen is not sensitive
- Slow not responsive / Hang
- Virus malware
- Unfortunately, the app has stopped
- ZTE often restarts itself
- And other errors
Read Also: How to Flash ZTE V769M Firmware via SP Flash Tool
Tools and Firmware Download
- Qualcomm Driver
- QFIL Tool
- Download firmware
————– (QFIL) ————–
ZTE_Redbull_V5_V9180_MSM8926_25032015_QFIL.zip
————– Flash By Mi Flash Tool or ADB Fastboot Mode ————–
How to flash Android via Mi Flash Tool
ZTE_Redbull_V5_V9180_V0.50_20151212_4.3_XFT.zip
ZTE_V5_V9180_V0.44_20141219_XFT.zip - Bypass Limit Google Drive Work Tutorial follow Bypass Google Drive Download Limit (Quota Exceeded) Error
Read Also: Flash Firmware ZTE Blade L2 Single SIM
How to Flash ZTE V9180 Firmware via QFIL Tool
- First of all, get all tools and extract them into one folder.
- Install the Qualcomm Driver. If the installation failed, you need to install it manually from the device manager.
- Open the QFIL Tool.
- Make sure the Qualcomm Driver for QFIL is installed correctly and detected on the device manager (COM6 port is my device, may be different on your PC).
- If the installation failed, try this method:
Turn off your device, hold Volume Up + Volume Bottom, and plug your device into PC, wait till the driver is installed and the device is detected, this will appear on the QFIL COM port.
- Extract the ZTE V9180 firmware and make sure you see a file with a .mbn format, similarly as for files like prog_emmc_xxx.mbn, also the important files are rawprogram0.xml or rawprogram2.xml and patch0.xml. Those 3 files are very important (prog_emmc_xxx.mbn, rawprogram0.xml, and patch0.xml), and sometimes the files are not included on the ROM flash file pack, you need to find them manually via google or XDA forum.
- Click menu Flat build then click menu Browse, find the firmware Stock ROM where you extract.
- Find the files prog_emmc_xxx.mbn, then open the .mbn file.
- Click menu Load XML, you will see the file like rawprogram0 with XML format, click open and next click patch0 with the same format and last click open again.
- Now, click the Download button and wait to flash the firmware.
- This process usually taking 5-10 minutes.
- Flash finish will show messages “Download Succeed” and “Finish Download” on the tab menu Status.
- Unplug the cable and turn on your device.
- First booting after flash will take 5-10 minutes. So, just wait until entering the wizard menu.
- Finally, flash ZTE V9180 is done.
Read Also: Download ZTE Blade L2 Flash File
With this tutorial on How to Flash ZTE V9180 Firmware via QFIL, you will get a fresh ROM without errors.
