Samsung Galaxy S6 Edge SM-G925I Firmware
Unlock First, When flash failed Click Here
How to flash Samsung Galaxy S6 Edge SM-G925I Stock Firmware? With this firmware Samsung Galaxy S6 Edge SM-G925I stock ROM, the android that has problems like bootloop or forgot password will be easy to overcome. If it happens to your Samsung SM-G925I, you can try this Samsung Galaxy S6 Edge SM-G925I flash mode to solve it. Need to remember is after flash Samsung Galaxy S6 Edge SM-G925I is done, the data stored in the internal memory will be wipe. So always backup the data first before execution Samsung Galaxy S6 Edge SM-G925I stock firmware flash file. Because this way will replace the damaged system files or errors become fresh or normal again.
With this tutorial How To Flash Firmware Samsung Galaxy S6 Edge SM-G925I via Odin can also solve other error problems, such as:
- Forgot Password
- Forget Pattern
- Samsung Galaxy S6 Edge SM-G925I Bootloop
- Softbrick
- The touch screen is not sensitive
- Samsung Galaxy S6 Edge SM-G925I Stuck at Logo
- Blank screen
- Slow not responsive / Hang
- Samsung Galaxy S6 Edge SM-G925I only vibrate
- Due to a malware virus
- Unfortunately, messages has stopped
- Unfortunately, the app has stopped
- Often restarts itself
- And other errors
Tools and Samsung S6 Edge SM-G925I Firmware Download
- Download flash file Samsung Galaxy S6 Edge SM-G925I stock ROM firmware, Only for Samsung SM-G925I
- Odin3 V3.12.5.zip
- Samsung Driver
- USB Cable recommended using original Samsung USB Cable
- PC / Laptop OS Windows recommended Win 7
- Stuck on FRP? Try this way How to Bypass FRP on Samsung Galaxy S6 Edge SM-G925I
Read Also: How To Flash Samsung Galaxy S6 Edge Plus SM-G928C Firmware via Odin
How To Flash Samsung Galaxy S6 Edge SM-G925I Firmware via Odin
- Model type is very important, make sure it has chosen correctly before download.
- After all the materials downloaded, move it to one folder.
- Extract the Samsung SM-G925I Firmware with .zip and you should see the .md5 file.
- Install the Samsung Galaxy S6 Edge SM-G925I driver and make sure your computer detects the device.
- Open and run Odin.
- Turn off your Samsung Galaxy S6 Edge SM-G925I.
- Then go to Download Mode, press and hold down “Volume Down + Home + Power” together, you will see “Warning” message, then you should quickly press Volume Up.
- If it is already in download mode, check on Odin application whether it has been detected or not.
- When connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).
- Then click the “AP” and locate the .md5 file earlier in the extracted folder. If there is more than “AP” files, please input it according to its original name “BL“, “CP“, “CSC“.
- And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).
- If everything is ready, click on “Start” to start flashing Samsung Galaxy S6 Edge SM-G925I.
- A successful flash sign will display the message “PASS!” in the upper left of the Odin application.
- After the message appears, Samsung Galaxy S6 Edge SM-G925I will reboot the system automatically and wait until entering the wizard menu.
- This boot process will take a little longer than usual, so just wait.
- Flash Samsung Galaxy S6 Edge SM-G925I finally is done.
Read Also: How To Flash Samsung Galaxy S6 Edge SM-G925F Stock ROM via Odin
NOTE:
If booting more than 10 minutes or get bootloop, you should wipe reset manual through recovery. Turn off your Samsung Galaxy S6 Edge SM-G925I, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).
