Mito A990 Firmware

Unlock First, When flash failed Click Here

How to Flash Mito A990 Firmware via SPD Flash Tool? Flash is a way to overcome various problems that occur on Mito A990. Because of this Mito flash file, errors like bootloop or malware virus can be overcome and returned to normal without constraints. You can get the Mito firmware for official via Android File Host. This firmware is a stock ROM of Mito. Just make sure your device is the same as this firmware file version.

Flashing is very useful to restore your troubled android. Because of how this flash will replace the Mito A990 firmware problem with fresh stock ROM without error.

With this Tutorial How to Flash Firmware Mito A990 via SPD Flash Tool, you can also solve other error problems, such as:

• Forgot Password
• Stuck on Logo
• Forget Pattern
• Mito A990 Bootloop
• Soft Brick
• Blank Screen
• The touch screen is not sensitive
• Slow not responsive / Hang
• Mito hang on Logo
• Virus malware
• Unfortunately, the app has stopped
• Mito often restarts itself
• And other errors

Read Also:  How to Flash Xolo A600 Firmware via Flash Tool

Tools and Firmware Download

1. Spreadtrum Driver
2. SPD Flash Tool
3. WriteIME Tool (optional, use it if IMEI invalid)
4. Download firmware Mito A990 20112017_V06_NewLCD.7z stock ROM via AFH

Read Also:  Flash Firmware Xolo Opus 3

How to Flash Mito A990 Firmware via SPD Flash Tool

1. First of all, get all the tools and extract the .zip file into one folder.
2. Extract the Spreadtrum driver .zip and click “Install this driver software anyway“, make sure the driver same as your OS 32 bit or 64 bit.
3. If the installation failed, you need to install it manually from the device manager.
4. Download and extract the Mito A990 flash file firmware, make you got a .pac file in the folder.
5. Install the SPD Upgrade Tool and run the flash tool.
6. Click icon Gear 1 on the SPD flash tool, then find the .pac file where you extract the firmware. Wait for the firmware file to load on the table list.
   
7. Click on menu Gear 2 and Setting Bautrate to 921600 or leave it on default.
   
8. When all is done, click the Play button.
   
9. Turn off your device.
10. Remove the battery (just turn off your phone for a non-removable battery) and hold Volume Up and connect to the PC with cable data.
11. If flash is working, release the button volume and flash will run.
    NOTE:
    – If flashing does not starts/work, unplug the cable then remove the battery and reconnect it. Don’t forget to hold Volume Up, this will detect your device to the SPD flash tool.
    – If Volume Up nothing happens, try using Bottom Volume.
12. Flashing will run automatically if the driver installed correctly.
13. Wait until flash finished and show the Passed message from SPD Flash Tool.
14. Unplug the cable data and turn on your device if the Passed message showing up.
15. Finally, flash Mito A990 stock ROM firmware via SPD flash tool is done.

Read Also:  Xolo One Firmware

You also can flash Mito A990 via Research Download Tool, with the same firmware and method.

DO WITH YOUR OWN RISK