Advan i7U Firmware
Unlock First, When flash failed Click Here
How to Flash Advan i7U Firmware via QGDP Tool (CPB File)? This flash file stock ROM tutorial is used to solve various problems that occur on Advan. As an example, if there is bootloop or hang because of the virus, you can try this flashing way to overcome the bootloop and other problems on Advan software. The important thing to remember for this tutorial is to backup data stored in internal memory. Because this flash will wipe the stored data and replaced it with the new firmware file. Get Advan i7U firmware on the middle post. Don’t forget to install the USB driver first before the flash.
With this tutorial How To Flash Firmware Advan i7U via QGDP Tool can also solve other error problems, such as:
- Forgot Password
- Forget Pattern
- Advan i7U Bootloop
- Softbrick
- The touch screen is not sensitive
- Stuck at Logo
- Blank screen
- Slow not responsive / Hang
- Advan only vibrate
- Due to a malware virus
- Unfortunately, messages has stopped
- Unfortunately, the app has stopped
- Often restarts itself
- And other errors
Read Also: How To Flash Advan i7K Firmware via QGDP Tool
Tools and Firmware Download
- QGDP Driver Setup
- SP Drivers v 1.5 (Optional driver – Install via Device Manager)
- QGDP Assembly Single Port V3
- Download firmware Advan_i7U_7.0.021.P1_2GB_190619_7.0_QGDP.zip stock ROM via Mediafire
Read Also: Flash Meizu M5S
How To Flash Advan i7U Firmware via QGDP Tool
- Install the drivers, if you already installed on your PC, skip this step.
- Download the firmware and extract.
- Now install and open the QGDP Tool.
- Make sure your phone is turned off.
- After the flash tool opened, enter this password “ase” or “369” and make sure to change the language to English.
- Click on the Config menu then Browse, find the Advan i7U firmware where extracted.
- Now click Open then Apply.
- Wait until the CPB firmware loaded into flash tool QGDP.
- Click on the Start button.
- Now connect your phone with your PC (makes sure your phone is turned off and the battery is installed).
- When the drivers installed correctly, flashing will run automatically.
- If Windows Security asks to install the driver, please press Install this driver software anyway. In case, you need to remove the battery, put it again, and repeat step 10.
- Now flashing will run and wait until finish.
- Wait until 100%.
- Your phone will reboot into the main menu.
- The first booting will take a minute, just wait.
- Flash Advan i7U firmware via QGDP Tool is finished.
Follow this tutorial on How To Flash CPB Firmware via QGDP Tool with a full image or watch this video.
Read Also: Firmware Meizu M6 Note
