Advan S40 Firmware
Unlock First, When flash failed Click Here
How to Flash Advan S40 Firmware via QGDP Tool? Using this method will overcome Advan S40 Hammer which is problematic like bootloop or hang and slow. Because this flash file will replace the damaged system files to fresh again without error. Before flashing in try backup data stored in the internal memory first.
Because this flash will wipe the entire contents of data stored in the internal memory. With this stock ROM firmware, Advan S40 will feel as fresh as new.
With this tutorial How To Flash Firmware Advan S40 via QGDP Tool can also solve other error problems, such as:
- Forgot Password
- Forget Pattern
- Advan S40 Bootloop
- Softbrick
- The touch screen is not sensitive
- Advan S40 Stuck at Logo
- Blank screen
- Slow not responsive / Hang
- Advan only vibrate
- Due to a malware virus
- Unfortunately, messages has stopped
- Unfortunately, the app has stopped
- Often restarts itself
- And other errors
Read Also: How To Flash Advan E1C NXT S7D Firmware via Flash Tool
Tools and Firmware Download
- QGDP Driver Setup
- SP Drivers v 1.5 (Optional driver – Install via Device Manager)
- QGDP Assembly Single Port V3
- Download firmware ADVAN_S40_7.0.042.P1.190214113421.S40.RWTX_ADVAN_S40_OE.CPB.zip stock ROM via Google Drive
Read Also: Flash Advan A8 i55A
How To Flash Advan S40 Firmware via QGDP Tool
- Install the drivers, if you already installed on your PC, skip this step.
- Download the firmware and extract.
- Now install and open the QGDP Tool.
- Make sure your phone is turned off.
- After the flash tool opened, enter this password “ase” or “369” and make sure to change the language to English.
- Click on the Config menu then Browse, find the Advan S40 firmware where extracted.
- Now click Open then Apply.
- Wait until the CPB firmware loaded into flash tool QGDP.
- Click on the Start button.
- Now connect your phone with your PC (makes sure your phone is turned off and the battery is installed).
- When the drivers installed correctly, flashing will run automatically.
- If Windows Security asks to install the driver, please press Install this driver software anyway. In case, you need to remove the battery, put it again, and repeat step 10.
- Now flashing will run and wait until finish.
- Wait until 100%.
- Your phone Advan S40 will reboot into the main menu.
- The first booting will take a minute, just wait.
- Flash Advan S40 firmware via QGDP Tool is finished.
Follow this tutorial on How To Flash CPB Firmware via QGDP Tool with a full image or watch this video.
Read Also: Advan I5C Duo Firmware
