Advan S45A Firmware
Unlock First, When flash failed Click Here
How to Flash Advan S45A Firmware via SP Flash Tool? This flash file stock ROM tutorial is used to solve various problems that occur on Advan Star Fit S45A. As an example, if there is bootloop or hang because of the virus, you can try this flashing way to overcome the bootloop and other problems on Advan software. The important thing to remember for this tutorial is to backup data stored in internal memory. Because this flash will wipe the stored data and replaced it with the new firmware file. Get Advan Star Fit S45A firmware on the middle post. Don’t forget to install the USB driver first before the flash.
With this Tutorial How to Flash Firmware Advan S45A via SP Flash Tool, you can also solve other error problems, such as:
- Forgot Password
- Advan S45A Stuck on Logo
- Forget Pattern
- Soft Brick
- Advan Star Fit Blank Screen
- The touch screen is not sensitive
- Slow not responsive / Hang
- Stuck on Logo
- Virus malware
- Unfortunately, the app has stopped
- Advan S45A often restarts itself
- And other errors
Tools and Firmware Download
- MTK USB Driver
- USB Driver VCOM (install when flash won’t running)
- CDC Driver Installer (Optional, install when the device can’t detect on PC)
- Lenovo Driver (Optional, install when the device can’t detect on PC)
- SP Flash Tool V5 Google Drive (Use SP Flash Tool V3, if the scatter file not load. Download SP Flash Tool 3)
- USB Cable Data
- Download firmware ADVAN Star Fit S45A TCK4511_S45A_V17_20140922_joelzr.zip stock ROM via Mediafire
Read Also: Flash Acer Liquid Z410
How to Flash Advan S45A Firmware via SP Flash Tool
- First of all, get all the tools and extract the .zip file.
- Extract the Advan S45A flash file and you will see “MTxxxx_Android_scatter.txt“.
- Install USB driver.
- Install and run the SP Flash Tool application.
- Click on Scatter-loading, then open the folder of Advan S45A firmware, then click “MTxxxx_Android_scatter.txt“.
- Wait until the Advan Star Fit S45A firmware loaded.
- Uncheck on the Preloader file when you not sure of this ROM for Advan S45A. This will prevent hard brick, this is optional.
- Make sure to select Download Only mode, then click the Download button.
- Now Turn off your Advan S45A and remove the battery (for non-removable battery, just need to turn off the device).
- Press Volume Up and connect the device to PC (press Volume Down when flash not running, unplug the cable before reconnect and repeat the steps above).
- Flash Advan S45A will run automatically.
- Wait until flashing finishes with a green sign.
- Unplug the cable and turn on your device.
- The first booting process will take 10-15 minutes, so just wait until entering the wizard menu.
- Flash Advan Star Fit firmware is done.
Read Also: Firmware Advan S40 LTE
- When the device can’t detect on PC, try to reinstall the driver (optional drivers).
- When flashing won’t running on “Download Only” mode, change with “Firmware Upgrade” mode, disconnect the device before reflashing.
- When Advan getting bootloop after flash, try to hard reset via recovery.