Huawei Ascend G6-L11 Firmware

Unlock First, When flash failed Click Here

How to Flash Huawei Ascend G6-L11 Firmware via Huawei Multi-Tool? This flash file stock rom tutorial is used to solve various problems that occur on Huawei Ascend G6-L11. As an example, if there is a bootloop or hang because of the virus, you can try this flashing way to overcome the bootloop and other problems on Huawei G6-L11 software. The important thing to remember for this tutorial is to backup data stored in internal memory. Because with this flash will wipe the stored data and replaced with the new firmware file.

Get Huawei Ascend G6-L11 firmware on the middle post. Don’t forget to install the Huawei driver first before the flash. When flashing won’t start, you need to unlock the device. Visit the link above this article and follow the step on how to unlock Huawei Ascend G6-L11.

With this Tutorial How to Flash Huawei Ascend G6-L11 Firmware via Huawei Smartphone Multi Download Software, you can also solve other error problems, such as:

• Huawei Ascend G6-L11 Forgot Password
• Huawei G6-L11 Stuck on Logo
• Forget Pattern
• Huawei Ascend G6-L11 Bootloop
• Soft Brick
• Huawei G6-L11 Blank Screen
• The touch screen is not sensitive
• Slow not responsive / Hang
• Huawei Ascend G6-L11 hang on Logo
• Virus malware
• Unfortunately, the app has stopped
• Huawei G6-L11 often restarts itself
• And other errors

Only used for Huawei Qualcomm chipset.

Tools and Huawei G6-L11 Firmware

1. Huawei Smartphone Multi Download Software and driver
2. Android Qualcomm USB Driver
3. PC / Laptop
4. Unlock Bootloader (Optional, some user can flash with LOCKED Bootloader, unlock it when flash not working)
5. USB cable
6. Download firmware
   Huawei Ascend G6-L11 M04011_Board_Software_General_Android_4.3_EMUI_2.0_Lite.zip via Google Drive

Read Also: How to Flash Huawei Y6 2018 ATU-LX3 Firmware via Huawei Multi-Tool

How to Flash Huawei Ascend G6-L11 Firmware

1. First of all, download all tools and install them. If you are already installed skip this step.
2. Please read How to use Huawei Smartphone Multi Download Software for the full tutorial with image and video.
3. Run Huawei Smartphone Multi Download Software, click on QPBLFBML01.exe.
4. Click the Browse menu.
5. Then navigate to the Huawei Ascend G6-L11 firmware folder that has been downloaded.
6. After that, select the file with the format like the example above, namely HDU9200MC00N015.xml. This is an example of a firmware name, every Huawei has a different name.
7. Keep in mind, in the Huawei Ascend G6-L11 firmware folder there is usually more than one XML file. So please choose the name that matches the device type when browsing the firmware earlier.
8. Click Next for the next step.
9. Now connect Huawei G6-L11 to PC with USB cable data and make sure you are in Fastboot Mode or Download Mode.
   

   – To enter Fastboot Mode, press Volume Down + Power wait until show Android robot.
   – If Fastboot Mode not working, try to enter Download Mode, press Volume Atas + Volume Bawah and connect your device to PC. Hold the buttons until enter Download Update, then go for next step 9. You can check this video to enter Download Mode.

10. Click Scan&Download and wait for flashing Huawei G6-L11.
11. Wait for the device to connect to PC and flash will start automatically.
12. After 100% and finished, disconnect the Huawei G6-L11 and try to reboot to system.
13. Finally, flash Huawei Ascend G6-L11 firmware via HMT is done.

Read Also: Flash ROM Huawei BTV-DL09 via Recovery

Additional

• Usually, when opening HMT for the first time, a choice of modes will appear. Please select the Manufacture or R&D mode. For cases that fail flash, try the way from one of the XDA members.
• When clicking the Browse firmware menu on some PCs sometimes it asks to enter the HMT password. Just leave it blank and click Set.

Do With Your Own Risk