Huawei Y6 SCC-U21 Firmware

Categories : Huawei

Unlock First, When flash failed Click Here

How to Flash Huawei Y6 SCC-U21 Firmware via QFIL Tool? To solve or fix the Huawei Y6 android problem like bootloop or hang, forget the pattern, you can try this flash file as a solution. Because in this way will replace the file system ROM Huawei Y6 SCC-U21 problem with fresh or new. Just remember before the flashing is backup important in the internal memory. Because after flash finished, the data will be wipe and lost.

Because this flash will wipe the entire contents of data stored in the internal memory. With this stock ROM Huawei Y6 SCC-U21 firmware will feel as fresh as new.

How to Flash Huawei Y6 SCC U21 Firmware via QFIL Tool

With this tutorial How to flash Huawei Y6 SCC-U21 Firmware via QFIL Tool, you can also solve other error problems, such as:

  • Huawei Y6 Forgot Password
  • Huawei Y6 SCC-U21 Stuck on Logo
  • Forget Pattern
  • Huawei Bootloop
  • Soft Brick
  • Huawei Y6 SCC-U21 Blank Screen
  • The touch screen is not sensitive
  • Slow not responsive / Hang
  • Virus malware
  • Unfortunately, the app has stopped
  • Huawei Y6 often restarts itself
  • And other errors

Tools and Huawei Y6 SCC-U21 Firmware Download

  1. Qualcomm Driver for Huawei Y6 SCC-U21
  2. QFIL Tool
  3. Firmware BuHuawei_Y6_SCC-U21_C900B057_Board_Software_Southeast_Asia_Nonspecific_QFIL.zip stock ROM via Google Drive

Read Also:  How to Flash Huawei Y6 SCL-L01 Firmware

How to Flash Huawei Y6 SCC-U21 Firmware via QFIL Tool

  1. First of all, get all tools and extract them into one folder.
  2. Install the Qualcomm Driver. If the installation failed, you need to install it manually from the device manager.
  3. Open the QFIL Tool.
  4. Make sure the Qualcomm Driver for QFIL is installed correctly and detected on device manager (COM6 port is my device, may be different on your PC).How to Flash Huawei Y6 SCC-U21 Firmware File via QFIL Flash Tool
  5. If the installation failed, try this method:
    Turn off your device, hold Volume Up + Volume Bottom and plug your Huawei Y6 SCC-U21 to PC, wait till the driver installed and device detected. This will appear on the QFIL COM port.How to Flash Huawei Y6 SCC-U21 Firmware via QFIL Flash Tool
  6. Extract the ROM Huawei Y6 SCC-U21 and make sure you see a file with a .mbn format, similarly as for files like prog_emmc_xxx.mbn, also the important files are rawprogram0.xml or rawprogram2.xml and patch0.xml. That 3 files are very important (prog_emmc_xxx.mbn, rawprogram0.xml, and patch0.xml), and sometimes the files are not included on the ROM flash file pack, you need to find manually via google or XDA forum.
    How to Flash Huawei Y6 SCC-U21 Firmware via QFIL Flash ToolHow to Flash Huawei Y6 SCC-U21 Firmware via QFIL Flash Tool
  7. Click menu Flat build then click menu Browse, find the Huawei Y6 firmware where you extract.
  8. Find the files prog_emmc_xxx.mbn, then open the .mbn file.How to Flash Huawei Y6 SCC-U21 Firmware via QFIL Flash Tool
  9. Click menu Load XML, you will see the file like rawprogram0 with XML format, click open and next click patch0 with the same format and last click open again.
  10. After all ready, click the Download button and wait for the flash ROM Huawei Y6 SCC-U21 finished.
  11. This process usually taking 5-10 minutes.
  12. Flash finish will show messages “Download Succeed” and “Finish Download” on tab menu Status.
  13. Unplug the cable and turn on your Huawei Y6.
  14. First booting after flash will take 5-10 minutes. So, just wait until entering the wizard menu.
  15. Finally, flash Huawei Y6 SCC-U21 firmware Done.

Read Also: Flash Firmware Huawei Y6 SCL-L03

With this tutorial How to Flash Huawei Y6 SCC-U21 Firmware via QFIL, you will get a fresh ROM without errors.

DO WITH YOUR OWN RISK
Popular Search:
  • SCC-U21 firmware QFIL
  • scc-u21 qfil