Huawei Y618-T00 Firmware
Unlock First, When flash failed Click Here
How to Flash Huawei Y618-T00 Firmware via SP Flash Tool? Using this method will overcome Huawei Y618-T00 which is problematic like bootloop or hang and slow. Because this Huawei Y618-T00 flash file will replace the damaged system files to fresh again without error. Before flash Huawei Y618-T00 in try backup data stored in the internal memory first.
Because this flash will wipe the entire contents of data stored in the internal memory. With this stock rom Huawei Y618-T00 firmware will feel as fresh as new.
With this Tutorial How to Flash Huawei Y618-T00 Firmware via SP Flash Tool, you can also solve other error problems, such as:
- Huawei Y618-T00 Forgot Password
- Huawei Y618-T00 Stuck on Logo
- Forget Pattern
- Huawei Y618-T00 Bootloop
- Soft Brick
- Huawei Y618-T00 Blank Screen
- The touch screen is not sensitive
- Slow not responsive / Hang
- Huawei Y618-T00 hang on Logo
- Virus malware
- Unfortunately, the app has stopped
- Huawei Y618-T00 often restarts itself
- And other errors
Tools and Huawei Y618-T00 Firmware Download
- MTK USB Driver Google Drive
- USB Driver VCOM Google Drive (install when flash won’t running)
- CDC Driver Installer (Optional, install when the device can’t detect on PC)
- Lenovo Driver (Optional, install when the device can’t detect on PC)
- SP Flash Tool V5 Google Drive (Use SP Flash Tool V3, if the scatter file not load. Download SP Flash Tool 3)
- USB Cable Data
- Download stock ROM Huawei_Y618-T00_MT6582.zip Firmware Flash File via Google Drive Mediafire
- Password ZIP:
How to Flash Huawei Y618-T00 Firmware via SP Flash Tool
- First of all, get all the tools and extract the .zip file.
- Extract Huawei Y618-T00 flash file and you will see “MT6582_Android_scatter.txt“.
- Install driver.
- Install and run the SP Flash Tool application.
- Click on Scatter-loading, then open the folder of Huawei Y618-T00 firmware, then click “MT682_Android_scatter.txt“.
- Wait until the Huawei Y618-T00 firmware loaded.
- Uncheck on Preloader file when you not sure this ROM for Huawei Y618-T00. This will prevent from hard brick.
- Make sure to select Download Only mode, then click the Download button.
- Now Turn off your Huawei Y618-T00 and remove the battery (for non-removable battery, just need to turn off the device).
- Press Volume Up and connect the device to PC (press Volume Down when flash not running, unplug the cable before reconnect and repeat the steps above).
- Flash Huawei Y618-T00 will run automatically.
- Wait until flashing finish with a green sign.
- Unplug the cable and turn on your device.
- First booting process will take 10-15 minutes, so just wait until entering the wizard menu.
- Flash Huawei Y618-T00 firmware done.
- When the device can’t detect on PC, try to reinstall the driver (optional drivers).
- When flashing won’t running on “Download Only” mode, change with “Firmware Upgrade” mode, disconnect the device before reflashing.
- When Huawei Y618-T00 getting bootloop after flash, try to hard reset via recovery.