Micromax A58 Firmware

Unlock First, When flash failed Click Here

How to Flash Micromax A58 Firmware via SP Flash Tool (Scatter Flash File)? This flash file stock ROM tutorial is used to solve various problems that occur on Micromax. As an example, if there is a bootloop or hang because of the virus, you can try this flashing way to overcome the bootloop and other problems on the software. The important thing to remember for this tutorial is to backup data stored in internal memory. Because this flash will wipe the stored data and replaced it with the new firmware file. Get Micromax A58 firmware on the middle post. Don’t forget to install the USB driver first before the flash.

With this Tutorial How to Flash Firmware Micromax A58 via SP Flash Tool, you can also solve other error problems, such as:

• Forgot Password
• Micromax A58 Stuck on Logo
• Forget Pattern
• Bootloop
• Soft Brick
• Blank Screen
• The touch screen is not sensitive
• Slow not responsive / Hang
• Virus malware
• Unfortunately, the app has stopped
• Micromax often restarts itself
• And other errors

Read Also:  How to Flash Evercoss B75 Elevate Y3 Plus Firmware via SP Flash Tool

Tools and Firmware Download

1. MTK USB Driver
2. USB Driver VCOM (install when flash won’t running)
3. CDC Driver Installer (Optional, install when the device can’t detect on PC)
4. Lenovo Driver (Optional, install when the device can’t detect on PC)
5. SP Flash Tool V5 Google Drive (Use SP Flash Tool V3, if the scatter file does not load. Download SP Flash Tool 3)
6. USB Cable Data
7. Download firmware
   Micromax_A58_MT6572_T07_20092013.zip stock ROM via Google Drive
   Micromax_A58_MT6572_T09_23112013.zip stock ROM via Google Drive
8. If you get Limit Google Drive, you need to login to your Gmail account or follow this tutorial Bypass Google Drive Download Limit (Quota Exceeded) Error

Read Also:  Flash Oppo AX5S CPH1920

How to Flash Micromax A58 Firmware via SP Flash Tool

1. First of all, get all the tools and extract the .zip file.
2. Extract the Micromax A58 flash file and you will see “MTxxxx_Android_scatter.txt“.
3. Install USB driver.
4. Install and run the SP Flash Tool application.
5. Click on Scatter-loading, then open the folder of Micromax firmware, then click “MTxxxx_Android_scatter.txt“.
6. Wait until the firmware is loaded.
7. Uncheck on the Preloader file when you are not sure of this ROM for Micromax. This will prevent hard brick, this is optional.
8. Make sure to select Download Only mode, then click the Download button.
9. Now Turn off your device and remove the battery (for non-removable battery, just need to turn off the device).
10. Press Volume Up and connect the device to PC (press Volume Down when flash not running, unplug the cable before reconnect, and repeat the steps above).
11. Flash will run automatically.
12. Wait until flashing finishes with a green sign.
13. Unplug the cable and turn on your device.
14. The first booting process will take 10-15 minutes, so just wait until entering the wizard menu.
15. Flash Micromax A58 firmware is done.

Read Also: Download Evercoss B75A Winner Y3 Flash File

NOTE:

• When the device can’t detect on PC, try to reinstall the driver (optional drivers).
• When flashing won’t running on “Download Only” mode, change with “Firmware Upgrade” mode, disconnect the device before reflashing.
• When getting bootloop after flash, try to hard reset via recovery.

DO WITH YOUR OWN RISK