Micromax IN 1B Firmware

Unlock First, When flash failed Click Here

How to Flash Micromax IN 1B Firmware via SP Flash Tool (Scatter File)? Almost every android would be a problem like bootloop, hang, and slow response. And for example, it happened on your Micromax, you can try to flash with this firmware file ROM, to solve the problem. With a flawed Micromax IN 1B flash will come back to fresh and normal again.

Because the firmware that has been replaced with Micromax flash file stock ROM fresh without error. All you need to know is to backup the data in internal memory. Because this flash will wipe all data in the memory.

With this Tutorial How to Flash Firmware Micromax IN 1B via SP Flash Tool, you can also solve other error problems, such as:

• Forgot Password
• Micromax IN 1B Stuck on Logo
• Forget Pattern
• Bootloop
• Soft Brick
• Blank Screen
• The touch screen is not sensitive
• Slow not responsive / Hang
• Virus malware
• Unfortunately, the app has stopped
• Micromax often restarts itself
• And other errors

Read Also:  How to Flash Micromax A35 Firmware via SPD Tool

Tools and Firmware Download

1. MTK USB Driver
2. USB Driver VCOM (install when flash won’t running)
3. CDC Driver Installer (Optional, install when the device can’t detect on PC)
4. Lenovo Driver (Optional, install when the device can’t detect on PC)
5. SP Flash Tool V5 Google Drive (Use SP Flash Tool V3, if the scatter file not load. Download SP Flash Tool 3)
6. USB Cable Data
7. Download firmware Micromax_IN_1B_E7533_MT6765_SW_V05_HW_V2.0_4GV_64GB_020721.zip stock ROM via Google Drive / Mirror

Read Also:  Flash Evercoss A54B

How to Flash Micromax IN 1B Firmware via SP Flash Tool

1. First of all, get all the tools and extract the .zip file.
2. Extract the Micromax IN 1B flash file and you will see “MTxxxx_Android_scatter.txt“.
3. Install USB driver.
4. Install and run the SP Flash Tool application.
5. Click on Scatter-loading, then open the folder of Micromax firmware, then click “MTxxxx_Android_scatter.txt“.
6. Wait until the firmware loaded.
7. Uncheck on the Preloader file when you not sure of this ROM for Micromax IN 1B. This will prevent hard brick, this is optional.
8. Make sure to select Download Only mode, then click the Download button.
9. Now Turn off your device and remove the battery (for non-removable battery, just need to turn off the device).
10. Press Volume Up and connect the device to PC (press Volume Down when flash not running, unplug the cable before reconnect, and repeat the steps above).
11. Flash will run automatically.
12. Wait until flashing finishes with a green sign.
13. Unplug the cable and turn on your device.
14. The first booting process will take 10-15 minutes, so just wait until entering the wizard menu.
15. Flash Micromax IN 1B firmware is done.

Read Also: Firmware Micromax A34

NOTE:

• When the device can’t detect on PC, try to reinstall the driver (optional drivers).
• When flashing won’t running on “Download Only” mode, change with “Firmware Upgrade” mode, disconnect the device before reflashing.
• When getting bootloop after flash, try to hard reset via recovery.

DO WITH YOUR OWN RISK