Samsung Galaxy J1 SM-J120H Firmware Download and Flash via Odin

Flash is a way to overcome various problems that occur on Samsung Galaxy J1 SM-J120H. Because by this Samsung Galaxy J1 SM-J120H flash file, which error like bootloop or malware virus can be overcome and return to normal without any constraints. Flashing is very useful to restore your troubled android. Because of how this flash will replace the Samsung Galaxy J1 SM-J120H firmware problem with fresh stock rom without error.

Samsung Galaxy J1 SM J120H Firmware Download and Flash via Odin

With this Tutorial Samsung Galaxy J1 SM-J120H Firmware and Flash via Odin you can also solve other error problems, such as:

  1. Samsung Galaxy J1 SM-J120H Forgot Password
  2. Samsung Galaxy J1 SM-J120H Forget Pattern
  3. Samsung Galaxy J1 SM-J120H Bootloop
  4. Samsung Galaxy J1 SM-J120H Stuck on Logo
  5. Samsung Galaxy J1 SM-J120H Softbrick
  6. Samsung Galaxy J1 SM-J120H Touch screen is not sensitive
  7. Samsung Galaxy J1 SM-J120H Slow not responsive / Hang
  8. Samsung Galaxy J1 SM-J120H Virus malware
  9. Samsung Galaxy J1 SM-J120H Unfortunately messages has stopped
  10. Samsung Galaxy J1 SM-J120H Unfortunately the app has stopped
  11. Samsung Galaxy J1 SM-J120H often restarts itself
  12. And other errors

Tools

Read Also:

Samsung Galaxy J1 SM-J120H Firmware and Flash via Odin

  • Use Filter Menu to select your Region (recommend use latest version).
  • Model type is very important, make sure it has chosen correctly before download.
  • After all materials downloaded, move it into one folder.
  • Extract the Samsung Galaxy J1 SM-J120H firmware flash file with .zip and you should see the .md5 file.
  • Install Samsung driver and make sure your device is detected by computer.
  • Open and run Odin.
  • Turn off your Samsung Galaxy J1 SM-J120H.
  • Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.

Samsung Galaxy J1 SM-J120H Firmware and Flash via Odin

  • If it is already in download mode, check on Odin application whether it has been detected or not.
  • When device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).

Samsung Galaxy J1 SM-J120H Flash File via Odin

  • Then click the AP and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than AP, please input it according to its original name BL, CP, CSC (optional files).

Samsung Galaxy J1 SM-J120H Firmware and Flash via Odin Samsung Galaxy J1 SM-J120H Firmware and Flash via Odin

  • And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).

Samsung Galaxy J1 SM-J120H Firmware and Flash via Odin

  • If everything is ready, click on “Start” to start flash Samsung Galaxy J1 SM-J120H.
  • A successful flash sign will display the message “PASS!” in the upper left of the Odin application.

Samsung Galaxy J1 SM-J120H Firmware and Flash via Odin

  • After the message appears, Samsung Galaxy J1 SM-J120H will reboot system automatically and wait until enter the wizard menu.
  • Booting process will take 5-15 minutes even more, so just wait.
  • Finally, flash Samsung Galaxy J1 SM-J120H via Odin flashtool is done.

NOTE:

If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Galaxy J1 SM-J120H, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).

Do With Your Own Risk